View Larger Picture

E-mail This Page To A Friend

          This is the 1/10 scale electric powered, radio controlled,
                  Tamiya Raybrig NSX 2005 On-Road, Car Kit.
               This car may be used in Tamiya official races.

FEATURES: Chassis: TA05 composite bathtub style .08" (2mm) thick
          Drive: Four wheel belt drive, tension adjustable
          Motor: 540 motor with pre-attached leads
          Ball Bearings: Full set included
          Shocks: Four oil filled CVA plastic body
          Gearboxes: Enclosed, front and rear
          Differentials: Ball type
          Transmission: Single speed
          Tires: .94" (24mm) wide, 2.5" (64mm) diameter racing slick with foam
            inserts
          Wheels: One-piece 6-spoke 2" (51mm) wide 1.9" (48mm) diameter,
            gun metal gray plastic with +2° offset
          Bumpers: Foam front bumper
          Suspension: Double wishbone
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Bell-crank type
          Servo Saver: Included

INCLUDES: Raybrig NSX 2005 rolling chassis with oil filled shocks, 540 motor,
            clear body, slick tires, foam inserts, foam bumper, 6-spoke wheels
            22 tooth pinion gear, 70 tooth spur gear, white rear wing, mirrors,
            decal sheet and instructions.
                                                                              _
REQUIRES: Radio: 2-channel with 1 standard servo
          Radio Batteries: 8 AA size
          Battery: 6 flat pack with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Paint: Spray or brush-on for Lexan body
          Misc. Items:     Building and track equipment

SPECS:      VEHICLE-
          Length:       14.6" (372mm)
          Width:         7.5" (191mm)
          Height:        4.8" (122mm)
          Weight:     2.3lbs  (1060g)
          Wheelbase:    10.1" (257mm)
          Tread:         6.6" (167mm)
          Gear Ratio: 1:7.159
            BODY-
          Length:     16.5" (419mm)
          Width:       7.5" (190mm) at rear wheels
                       7.4" (187mm) at front wheels
          Height:        4" (102mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                       Bearing Set Qty.
             2   10 x 15mm  Front Ball Diff         (use 1 DTXC1595)
             2   10 x 15mm  Rear Ball Diff          (use 1 DTXC1595)
             2    4 x 8mm   Center Pulley           (use 1 DTXC1511)
             2    5 x 11mm  Front Axles             (use 1 DTXC1547)
             2    5 x 11mm  Rear Axles              (use 1 DTXC1547)
             4    5 x 8mm   Steering Arms           (use 2 DTXC1523)

                                                                   jxs 12/12/05
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators