Tower Catalog Page:	105
E-mail This Page To A Friend

     Relive the good old days of 32 pitch gears, 3-piece wheels and kits
    you build yourself with the Tamiya 1/10 Scale Frog 2WD Off Road Racer.
                  This is a model kit and must be assembled!

FEATURES: Chassis: ABS resin space
          Drive: Two wheel rear drive
          Motor: Mabuchi RS540SH stock motor with attached bullet connectors
          Bearings: Four 5x11 bearings in the gearbox and 5x11 plastic busings
           in the rear axle carriers and front wheels
          Shocks: Two rear horizontal mounted, aluminum body, oil-filled
          Body: Clear Lexan buggy type with clear rear wing
          Gearbox: 4 gear diff (pinion drives spur, spur drives drive gear,
           drive gear drives diff gear)
          Differential: Plastic bevel gear type
          Transmission: Single speed
          Speed control: Tamiya TEU-101BK forward and reverse ESC
          Pinion gears: 16 tooth, 18 tooth and 19 tooth included
          Wheels: 1.4" front, 1.6" rear, realistic 3-piece, white in color
          Tires:  Ribbed racing front, high-grip rear spiked
          Bumpers: Front plastic
          Suspension: Inboard spring type front suspension
          Camber Tie Rods: non adjustable
          Steering Tie Rods: adjustable
          Steering: Steering rods attach to servo saver and knuckle arms
          Servo Saver: Included
          Driveshafts: re-designed dog bone style with rubber boots

INCLUDES: Tamiya Frog Buggy w/two horizontal mounted friction type rear shocks,
            540 size motor,  body, tires, wheels front bumper, 16, 18, and 19
            tooth pinion gears, 49, 50, and 52 tooth spur gears, TEU-101BK
            forward/reverse ESC, decals and building instructions

REQUIRES: Radio: 2-channel radio with one standard servo - FUTJ13**
          Battery: 6 flat pack with standard connector - DTXC2030
          Charger: AC/DC timed or peak for 6-cell battery - DTXP4011
          Misc. Items: Paint for body (Tamiya uses TAMR8611, TAMR8601, and
           TAMR8605 for box photos)and building and track equipment

SPECS:       CHASSIS-
           Length: 16.1" (410mm)
           Width:   9.4" (240mm) at rear wheels, widest point
           Height:  5.7" (145mm)
           Weight: 2.2lbs (1020g)
           Wheelbase: 9.8" (250mm)
           Tread: Front and Rear 7.3" (185mm) wheels on-center side-to-side
           Track: Front and Rear 8" (203mm)
           Tires, Front 2.9" (73mm) diameter .79" (20mm)
                  Rear  3.4" (86mm) diameter 1.6" (42mm) wide
             BODY-
           Length:  12" (304mm)
           Width:    2"  (51mm) at front wheels, narrowest point
           Width:  3.8"  (98mm) behind rear wheels, widest point
           Height: 2.4"  (61mm)

COMMENTS: To Replace bushings with Ball Bearings use:
            Qty.  Size      Location                       Bearing Set Qty.
             4    5x11      Gearbox                          DTXC1547 x 2
             4    5x11      Rear axle carriers               DTXC1547 x 2
             4    5x11      Front wheels                     DTXC1547 x 2

                                                                   jxs 11/02/05
                                                                  kpm01/17/2006
                                                                         ir/jxs
                                                         specs updt jxs 8/23/06



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators