Parts Express Eligible:	Yes
E-mail This Page To A Friend

         This is the optional 325mm long Carbon Main Blades for the
                       Heli-Max MX400 Helicopter.

FEATURES: Carbon fiber construction
          Pre-Installed brass bushings
          Can be used on other electric helis requiring 325mm carbon blades

INCLUDES: One set of optional Carbon Main Blades for the Heli-Max MX400
          Two 3x16mm hex head screws (requires a 2.5mm hex wrench to install)
          Two 3mm nylon insert lock nuts
          Four 3x13mm spacers (2mm thick)

REQUIRES: 345mm Carbon Fiber Tail Boom (HMXE9103)
          Long Tail Drive Belt         (HMXE9715)
          Long Rudder Control Rod      (HMXE9623)
          **When installing these blades on the MX400 the above listed parts
          MUST be used**

SPECS:    Length: 12.8"  (325mm)
          Width:  1.28" (32.5mm)
          Thickness: .21" (5.3mm)

COMMENTS: The stock 6-pole motor will work with these blades but it is
            suggested to install an optional Motor Pinion HMXE8010, HMXE8011
            or HMXE8012 for desired head speed and motor efficiency.

          These will work on the AXE 400.                          jxs 11/14/05
                                                                         ir/jxs
                                                                   maf 5/5/9



– If you need more information, use these Heli-Max resources –

E-mail: helihotline@hobbico.com
Web Site: http://www.helimax-rc.com/
Phone: 217-398-8970


 
Postal Address:
Heli-Max
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators