This is a Giant Scale Servo by Hobbico.
This Servo is Used for Very Large Scale Cars, Trucks, or Airplanes
Where A Large Amount of Torque is Necessary.
FEATURES: One of the Strongest Available Anywhere
Dual Ball Bearings for Smooth Output and Precision
Watertight Case
Indirect-Drive Potentiometer
Cored Motor Design
Enormous Gear Train for Reliable Operation
Universal Connector Fits Futaba, Hitec, JR, KO Propo, Airtronics Z,
and Tower Hobbies. Old Airtronics "A" requires an adapter.
One Year Warranty
INCLUDES: One Giant Scale Servo w/Universal Connector
Three Extra Heavy Output Arms
One Hardware Accessory Bag (Screws, Grommets, Eyelets)
One Universal (See COMMENTS)
SPECS: 4.8V 6V
Torque: 275 oz-in (19.8 kg-cm) 343 oz-in (24.7 kg-cm)
Speed: .19 sec .14 sec
Current Drain: Idle: 8mA
Running w/No Load: 700mA
Signal Pulse: Positive Pulse Control 1520us Neutral
Weight: 5.36oz (152g)
Length: 2.59" (66mm)
Width: 1.18" (30mm)
Height: 2.26" (57.6mm)
Round servo arm: diameter- 39.80mm (1.57 in.)
Straight arm: length- 54.40mm (2.14 in.)
X servo arm: 55.90mm (2.20 in.) and 60.85mm (2.40 in.)
COMMENTS: Universal : Because This Servo has a High Current Drain, the
is Used to Plug the Servo Into the Receiver and Also to
Wire Directly to the Battery Pack for a Power Source. This is Done
so the High Current Does Not Damage the Receiver. It is Up To The
Modeler to Hook Up the Power Supply Wire to the Battery.
Diagram-> Servo----->Receiver
\-->Power Source Battery
JAL 2/4/99
ir/jl
Click here for Units of Measure Conversion Calculators
|