This is the Great Planes ElectriFly Lithium Polymer 11.1V 910mAh
3-Cells In Series Battery Pack.
Ideal for larger Park Flyers, electric airplanes up to Speed 400
and small electric helis.
These batteries must be Charged ONLY with a Charger designed to
Charge Lithium Polymer batteries which can apply
the "Constant Current/Constant Voltage" (CC/CV) Charge technique.
FEATURES: Next generation replacement for , , and Lithium Ion cells
SafeCharge Circuitry prevents individual cells from overcharging.
If any cell reaches 4.2V, the SafeCharge Circuit automatically
stops the Charge process entirely.
Unique power technology offers high energy density, low weight,
long life, safe operation, and environmentally friendly chemistry.
INCLUDES: One ElectriFly Lithium Polymer 11.1V 910mAh Battery Pack with Red
2-pin Charge Plug with 24 gauge wire, and 16 gauge Discharge wire
with Dean's Ultra Female Plug
REQUIRES: Charger such as the Great Planes TRITON series, Hobbico Accu-Cycle
Elite (HCAP0280), Hobbico Quick Field Charger MkII HCAP0290
or Great Planes PolyCharge Lithium Polymer DC Charger (GPMM3010)
If a Charge Lead is needed, use the Great Planes 2 Pin/Banana Plug
Charge Adapter (GPMM3105). It is directly compatible with the
Charge Plug on the battery
SPECS: Dimensions: .79" x 1.34" x 2.44" (20mm x 34mm x 62mm)
Weight: 2.78oz (79g)
Number of Cells: 3, wired in Series
Capacity: 910mAh
Volts: 11.1V
Minimum Discharge Voltage: 7.5V
Maximum Charge Voltage: 12.6V
Maximum Currents:
Charge, 910mA
Discharge, 13.6A (15C)
COMMENTS: Works in the AXE CP Heli (Dean's Micro to Dean's Male Ultra Adapter
(GPMM3127) is required
NEVER Charge Lithium Polymer batteries with a Charger designed for
, , or any other type of battery chemistry. Use ONLY
the Chargers listed under REQUIRES or equivalent substitutes.
Do not allow cells to overheat at any time. Cells which reach
greater than 140°F (60°C) will usually become damaged and
could catch fire.
Do not Charge or Discharge cells on or near combustible
materials including paper, plastic, carpets, vinyl, leather, wood,
inside an R/C model or full size automobile.
Do not expose cells to water or moisture at any time.
Do not store batteries near an open flame or heater.
Do not assemble cells or pre-assembled packs together with
other cells or packs.
Do not leave a battery unattended during Charging or Discharging
Always store batteries in a secure location away from children
Always remove a battery if model is involved in any kind of
crash. Carefully inspect the battery and connectors for even the
slightest damage. CAUTION: cells may be hot! Do not allow the
electrolyte to get into eyes or on skin. Wash affected areas
immediately if they come into contact with electrolyte.
Do not alter or modify connectors or wires of a Lithium battery pack.
jxs 01/25/06
ir/jxs
Click here for Units of Measure Conversion Calculators
|