E-mail This Page To A Friend

         This Glider was Designed Specifically For The R/C Beginner.
              It is Fun to Fly, Inexpensive and Quick To Build.
              (2 X 4 stands for Two Channel X About Four Feet)

FEATURES: Simple Yet Very Strong Light Plywood and Balsa Structure.
          Enough Room to Install A Standard Flight Pack.
          Assembly Time of 4 to 6 Hours.
          Suited for Flying from Smaller Fields or is Also At Home in Wide
            Open Spaces.
          Can Be Lanched With A Standard Hi-Start or By Hand Launching.

INCLUDES: All The Wood To Build The Kit, Full Size Rolled Plans, Photo
            Illustrated Instruction Booklet.

SPECS:    Wingspan: 49.5"
          Wing Area: 409 sq in
          Wing Loading: 9.8 oz/sq ft
          Weight With Standard Radio: 28 ounces
          Fuselage Length: 38.5"
          Airfoil: Flat-Bottom, Polyhedral

REQUIRES: Radio: 2 Channel w/Standard Servos (micros or minis Not Required)
          Standard Hi-Start
          Covering: One 6 Foot Roll
          Misc. Items: Building and Field Equipment, Small Hinges, Control
            Horns, Snaplinks, Pushrods.

COMMENTS: It is Possible to use a Optional Power Pod with this kit.
                                                                          ir/jl



– If you need more information, use these House of Balsa resources –

E-mail: HOBANDZAP@aol.com
Web Site: http://www.houseofbalsa.com
Phone: 760-246-6462


 
Postal Address:
House of Balsa
10101 YUCCA ROAD
ADELANTO, CA 92301  








Click here for Units of Measure Conversion Calculators