View Larger Picture

Tower Catalog Page:	106
E-mail This Page To A Friend

          This is the 1/10 scale electric powered, radio controlled,
                    Tamiya Dark Impact Off-Road Buggy Kit.
                                                                              _
FEATURES: Chassis: Monocoque bathtub DF03 .078" (2mm) thick
            battery installs through bottom of chassis
          Drive: Four wheel shaft drive
          Motor 540 size
          Full ball bearings
          Shocks: CVA oil filled
          Gearbox: Sealed
          Differentials: Ball type
          Transmission: Single speed
          Tires: High density spiked 3.25" (82mm) diameter, 1.75" (44mm) wide
              rear tires and 3.25" (82mm) diameter, 1.30" (33mm) wide front
              tires
          Wheels: Plastic dish type, Black in color
          Body: Clear buggy type with rear wing
          Bumpers: Front and rear plastic
          Suspension: Four wheel independent double wishbone
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Bell-crank type

INCLUDES: Tamiya Dark Impact buggy kit with oil-filled shocks, 540 motor,
             clear body with wing, tires, foam inserts, decals, wheels,
             26 tooth pinion gear, 78 tooth spur gear and illustrated
             instruction manual                                 _

REQUIRES: Radio: 2-channel with 1 standard servo
          Radio Batteries: (8) AA size
          Speed Control: Electronic
          Battery: 6-cell with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Paint: Spray or brush-on of modeler's choice
          Misc. Items: Building and track equipment

SPECS:    Tires- Front:3.25" X 1.30 " (82X33mm)
                  Rear:3.25" x 1.75 " (82x44mm)
            BODY-
          Length:  15.2" (387mm)
          Width:    9.8" (250mm) at rear wheels (widest point)
          Height:   5.2" (132mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                      Bearing Set Qty.
              4   10X15mm   Differential              DTXC1595  (2)
              8    5X8mm    Differential              DTXC1523  (4)
              2    5X10mm   Differential              DTXC1535  (1)
              3    5X9mm    Differential              DTXC1531  (2)
              1    3X8mm    Differential              N/A
              8    5X11mm   Hubs                      DTXC1547  (4)

                                                                    jxs 4/07/06
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators