This is the 1/10 scale electric powered, radio controlled,
Associated RC10 TC4 on-road ready-to-run Touring Car.
This kit is designed for the advanced touring car racer.
FEATURES: Chassis:0.098" (2.5mm) thick, redesigned with the batteries moved
closer to the center line of the car than the TC3 for quicker
directional transitions
Drive: Four wheel shaft drive, blue anodized aluminum driveshaft
Motor: Team Associated Reedy Radon 17 turn
Radio: 2 channel AM 27MHz pistol grip Team Associated XP2 made by
Airtronics with steering and trim and reverse, steering
dual rate, ATV, charge jack and standard size steering servo
Ball Bearings: Rubber sealed full bearing set
Shocks: Factory oil-filled, VCS (Volume Compensating System) Macro
composite bodied with preload spacers to adjust ride height
Gearbox: Closed front & rear
Differentials: Ball type
Transmission: Single-speed-speed
Body: Pre-painted and trimmed with simulated carbon rear wing and
hood
Tires: Rubber treaded with inserts, 2.5" (64mm) outer diameter,
1" (26mm) wide
Wheels: Eight spoke chrome finish 2" (52mm) diameter, 1" (26mm)
wide
Speed Control: Electronic-LRP Ai Super Reverse Digital, ASCM8320
Bumper: Front, foam
Suspension: Adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Ackerman type that allows the inside front wheel to turn
tighter than the outside front wheel.
Servo Saver: Included, adjustable
INCLUDES: One 1/10 scale electric powered 4WD Associated TC4 ready to run
Touring Car with 17 turn motor, pre-painted and trimmed body,
tires, wheels, 23 tooth pinion gear, 72 tooth spur gear, 2 ch
radio with servo, ESC with reverse, street tuner decal sheet and
illustrated instruction manual
REQUIRES: Radio Batteries: (8) AA size
Battery: 6 cell w/standard connector (stick or side by side)
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
SPECS: VEHICLE-
Length: 14.7" (373mm)
Width: 7.5" (190mm)
Height: 4.2 (107mm) at rear body mount (highest point)
Weight: 3.03lbs (1375g) with electrics, without body
Wheelbase: 10.2" (259mm)
Tread: Front and Rear- 6.5" (164mm)
Front and Rear Track: 7.5" (190mm)
Ground Clearance: 0.31" (8mm)
Gear Ratio: 2.50:1
Tires- Front and Rear: 2.5" (64mm) outer diameter, 1" (26mm) wide
BODY-
Length: 1.6" (440mm)
Width: 7.5" (190mm)
Height: 4.1" (104mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 4x8x2mm Diff 1 ASCC3916
2 3/8 x 5/8mm Outdrives 1 DTXC1437
4 3/16 x 5/16mm Steering (optional) 2 DTXC1413
2 3/16 x 3/8mm Fr Input Shaft 1 DTXC1423
1 3/16 x 3/8mm Input Bearing Housing 1 DTXC1423
1 3/16 x 3/8mm Spur Gear 1 DTXC1423
4 3/16 x 3/8mm Fr Hubs 2 DTXC1423
4 3/16 x 3/8mm Rear Hubs 2 DTXC1423
It is not possible to request a specific radio channel or body color
because they are supplied by the manufacturer at random.
jxs 3/10/06
ir/jxs
– If you need more information, use these Associated resources – |
Web Site: http://www.rc10.com/
Phone: 949-544-7500
|
|
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630
|
Click here for Units of Measure Conversion Calculators
| 
E-mail This Page To A Friend
Primary Accessories
Primary Accessories
