View Larger Picture

Parts Express Eligible:	Yes
Tower Catalog Page:	76
E-mail This Page To A Friend

               This is the Robart #611 3/16" Wire Tri-Gear Set.
               Consists of 608HD 90 Deg. Mains & 610 Nose Gear.

FEATURES:   Part # 610 90 Deg. Nose with 5/32" Wire Strut
          Light durable and compact perfect for up to a 10 pound aircraft
          Durable, glass-filled, nylon housing supports an aluminum pivot
            bearing which secures the tempered steel 5/32 inch wire strut
          Positive up-and-down lock and positive tiller arm steering and smooth
            cam action. A 1/8 inch dia. pushrod is tapped 2-56 on one end for
            quick servo connection
          Also operates with standard or retract servos.

            Part # 608HD
          90 Deg. with 3/16" dia. Wire Strut
          Constructed from a durable filled nylon chassis, supporting a large
            aluminum pivot bearing
          Supplied with 3/16 dia. strut wires, each unit has positive up and
            down locks and are designed for aircraft weighing from 5 to 10 lbs
      These gears are also designed to operate with standard or retract servos.

INCLUDES: 2 - #608hd Main gear retracts
          1 - #610 Nose gear retract
          12 - Mounting screws
          Instructions for Nose gear and Main retracts
          Spare parts list

REQUIRES: Possible modification to aircraft to fit retracts
          Possible modification to wire for wheels

SPECS:  Nose gear: Total length closed: 8-1/8" (206.50mm)
                                  open: 8"     (203.20mm)
        Base: Width: side to side w/mounting tabs: 1-3/4" (45mm)
                            w/o mounting tabs: 15/16" (23.5mm)
                front to back w/actuating arm: 2-11/32" (71mm)
                            w/o actuating arm: 1-7/8" (48mm)
                        actuating arm extends: 1-1/8" (29mm)

        Main Gear:   Total Length closed: 11-1/4" (286mm)
                                    open: 11-1/8" (283mm)
        Base:  Width: side to side w/mounting tabs: 1-3/4" (45mm)
                            w/o mounting tabs: 15/16" (23.5mm)
                front to back w/actuating arm: 2-1/4" (57mm)
                            w/o actuating arm: 1-3/4" (45mm
                        accuating arm extends: 1-1/8" (29mm)

COMMENTS: You will need a 2-56 threaded rod to control actuators.
          They thread into the actuating arm and push/pull to activate.

                                                                     rda5/18/06
                                                                         ir/jxs




– If you need more information, use these Robart resources –

E-mail: robart@robart.com
Web Site: http://www.robart.com/
Phone: 630-584-7616


 
Postal Address:
Robart
625 N. 12TH STREET
ST. CHARLES, IL 60174  








Click here for Units of Measure Conversion Calculators