This is a set of Robart 85° Non-Rotating Main Retracts for
model airplanes weighing 8-18 pounds.
FEATURES: These are Robostrut ready
Positive UP and DOWN lock and smooth cam action mechanism.
Glass-filled nylon housing supports an Aluminum pivot bearing.
Retract unit only with NO struts
INCLUDES: One 85° Heavy Duty Retract unit right side
One 85° Heavy Duty Retract unit left side
One detailed installation instruction sheet
REQUIRES: Air Control Kit (Tubing, Valves, Air Vessel).
Hand pump with gauge, use ROBQ2363.
Wheels, struts.
SPECS: Retract Unit: Length: 3.69" (93mm) (including air cylinder)
Length: 1.5" (38mm) (mounting plate)
Width: 1.75"
Depth: 1.125"
COMMENTS: Optional Quick Connector (ROBQ2395)
(for ease in connecting and disconnecting the lines to the wings)
Optional Air Restrictors (ROBQ2389)
(restricts air flow to the Retract for a realistic movement,
and slows down the Retract Mechanism to scale speed).
A standard servo may be used to operate these Retracts.
Axles are not included (The instructions state how to bend the struts
with heat)
ajw 8/22/06
ir/jxs
– If you need more information, use these Robart resources – |
E-mail: robart@robart.com
Web Site: http://www.robart.com/
Phone: 630-584-7616
|
|
Postal Address:
Robart
625 N. 12TH STREET
ST. CHARLES, IL 60174
|
Click here for Units of Measure Conversion Calculators