View Larger Picture

E-mail This Page To A Friend

            This is the Xtrema LiPo Battery Charger and Watt Meter
                           from Tejera Microsystems.

FEATURES: Charges 1-10 cell Lithium Polymer packs at up to 8A
          Watt meter handles up to 100A peaks and displays volts, amps,
            watts and horsepower
          Temperature probe provides safety cutoff during Charge and displays
            motor or battery temp when used as a watt meter
          Intuitive menus allow easy programming, just enter cell count and
            milliamp settings
          Multiple memories for favorite packs with cell count verification
          Programmable max voltage from 4.2V per cell (MAX POWER) down to 3.7V
            (storage charge)
          Upgradable FLASH firmware with free lifetime updates online with
            purchase of optional cable
          Expansion data port for future add-ons such as a balancer,
            PC interface, tachometer and more

INCLUDES: Xtrema LiPo Battery Charger and Watt Meter

REQUIRES: 12V DC power source capable of 20A (or an automotive battery)
          Male Connector: To match largest battery pack
          Female Connector: Capable of 50A continuous or maximum expected
            current use for watt meter feature

SPECS:      Charger;
          Number of Cells: 1-10
          Input Voltage: 10.5-15V DC @ up to 20A
          Input Connectors: Super heavy duty alligator clips with 3' (91.4cm)
            cord
          Case Size: 6.25 x 3.25 x 2.25" (159 x 83 x 57mm)
          Weight: 22oz (624g)
          Charger Output Connections: 12 gauge fine strand silicon wire
          Volts per Cell: 3.70V (storage charge) -4.20V in .05V steps
          Charge Rate: 50mA - 8000mA in 50mA steps (4000mA max @ 10 cells)
          Battery Types: Lithium Ion, Lithium Polymer
          Safety Timer: 10 -900 minutes (120) default
          Fan: On only when needed for longer life
          Safety Temperature Cutoff: 60°-130°F (104°F default)
          Display: 4 line x 20 character LCD display
          Audible Alarms: Piezo speaker beeps every 15 seconds, beep once or
            disable

            Watt Meter:
          Input Supply Voltage:  6.5-15V DC <40mA
          Watt Meter Output Connections: 12 gauge fine strand silicon wire
          Voltage Measurement: 0-60V, resolution 0.01V
          Current Measurement: 1-100A peak, 50A continuous, resolution 0.01A
          Power Measurement: 0-6000W, resolution 0.01A
          Horsepower Measurement: 0-8.0 HP resolution .01 HP
          Temperature Measurement: 302°F (150°C)

                                                                    jxs 4/25/06
                                                                         ir/jxs



– If you need more information, use these TME resources –

E-mail: http://www.tmenet.com/contact.htm
Web Site: http://www.tmenet.com/
Phone: 813-661-2649


 
Postal Address:
TME
TEJERA MICROSYSTEMS ENGINEERING
11705 BOYETTE ROAD #418
RIVERVIEW, FL 33569  








Click here for Units of Measure Conversion Calculators