This is the radio controlled, electric powered, almost-ready-to-fly,
Great Planes ElectriFly E-Performance Series Extra 330S Park Flyer Airplane.
Park Pilot Program Legal Aircraft
For Intermediate Modeler/Fliers at least 14 years of age.
FEATURES: Construction: Laser cut balsa and plywood
Wings: Factory covered, built-up wood with oversized
Tail section: Factory covered, built-up wood construction with over-
sized control surfaces
Covering: Factory applied lightweight film
Cowl: Fiberglass construction, factory painted to match covering
Battery and Motor Compartment: Magnetic latches elimimate screw
fasteners for cleaner appearance and better aerodynamics
Landing Gear: Formed aluminum
Wheel Pants: Vacuum formed plastic, factory painted
Wheels: Lightweight 1.77" (45mm) diameter foam wheels
Spinner: 1.77" (45mm) diameter, plastic construction
Hardware: Molded from composite materials for precise response and
weight savings
Building Time: Ready to fly in only 6-8 hours.
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.
INCLUDES: Pre-built and covered wings, and tail assemblies, pushrods,
hardware and instruction manual
REQUIRES: The ElectriFly Park Flyer E-Performance Power System (GPMG4920)
includes the following required components in one package
Silver Series 35A Brushless Electronic Speed Control
35-30-1250kV Brushless Outrunner Electric Motor
2100mAh 11.1V 20C Battery Pack w/Balance Connector
Propeller: 10x7E (APCQ4123)
Battery Charger: compatible - (GPMM3010)
Radio: 4-channel with micro receiver and OR
6-channel with micro receiver
: Two micro size - (FUTM0414) radio listed above includes two
(four total required)
Servo Extensions: Two 6" (150mm) slim wire FUTM4506
Two 16" (400mm) FUTM3955
Dual Servo Extension: FUTM4130
Misc. Items: Building and field equipment
SPECS: Wingspan: 41" (1035mm)
Wing Area: 337 sq in (21.8 sq dm)
Weight: 27-31oz (765-880g)
: 11.5-13.2 oz/sq ft (35-40 g/sq dm)
Length: 40" (1015mm)
: 2-3/4" (70mm) Back from the wing's
at the
Control Throws- High Rate Low Rate 3D Rate
: Up & Down 5/8" (16mm) 5/16" (8mm) 1¼" (32mm)
: Right to Left 2½" (64mm) 1¼" (32mm) 3" (76mm)
: Up & Down ¾" (19mm) 7/16" (11mm) 1¼" (32mm)
jxs 4/13/07
ir/jxs
Click here for Units of Measure Conversion Calculators
|