View Larger Picture

Additional Pictures:	Picture 1 Picture 2 Picture 3
On-line Videos:	Video 1 (40.4 MB)
Instruction Manuals:	Manual 1 (1.0 MB)
Tower Catalog Page:	47
E-mail This Page To A Friend

    This is the electric powered, radio controlled, almost ready to fly
                  ElectriFly Edge 540 3D Aerobatic Airplane.
                       Park Pilot Program Legal Aircraft
      This Edge 540 3D is part of the ElectriFly E-Performance Series.
      For intermediate to experienced flyers 14 years of age and older.

FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and
            airfoiled control surfaces, motor box preinstalled with blind nuts
            providing perfect spacing for spinner backplate-no need for
            measuring, cowl ring also preinstalled
          Wings: Two piece with carbon fiber wing joiner and single screw
            attachment
          Motor Mount: Built-up plywood
          Covering: Top Flite MonoKote
          Aileron Control: Dual servo
          Cowl: Prepainted fiberglass, attaches with rare earth magnets
          Canopy: Clear, single
          Wheel Pants: Prepainted ABS
          Landing Gear: Prepainted aluminum 0.079" (2mm) thick
          Wheels: Two foam 1.75" (44mm) diameter
          Spinner: Red plastic, 1.75" (44mm) diameter
          Hardware: Full set included
          Building Time: Approximately 4-6 hours
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            date of purchase.

INCLUDES: ElectriFly ARF Edge 540 3D Aerobatic Airplane with fiberglass cowl,
            ABS wheel pants, landing gear, wheels, hardware, photo-illustrated
            instruction manual and two decal sheets

REQUIRES: Radio: 4 channel
          Servos: 4-micro
          Dual Servo Extension: For aileron servos
          6" (150mm) Slim Extension Wire: Two
          16" (400mm) Servo Extension: Two
          Motor: Rimfire 35-30-1250 outrunner
          35A ESC for Brushless Motors:
          Battery: LiPo 1500mAh 11.1V
          Cell Balancer: For LiPo battery,
          Battery Charger: LiPo compatible
          Propeller: 10x7E

SPECS:    Wingspan: 41" (1040mm)
          Wing Area: 353 sq in (22.9 sq dm)
          Weight: 29 - 32.0 oz (820 - 910g)
          Airfoil: Fully symmetrical, mid wing placement
          Wing Loading: 11.8 - 13.1 oz/sq ft (36 - 40 g/sq dm)
          Length: 39.5" (1005mm)
          Center of Gravity: 2-1/2" (64mm) back from the leading edge of the
            wing at the side of the fuselage

          Control Throws-  Low Rate          High Rate           3D
            Elevator:   1/2" (13mm) 8°  1-1/8" (29mm) 19°     2-1/4" (57mm)40°
            Rudder:     2" (51mm)   19° 2-3/4" (70mm) 27°     3-3/4" (94mm)39°
            Ailerons:   5/8" (16mm) 11° 1-1/8" (29mm) 20°     1-3/4" (44mm)33°

COMMENTS: Following are the MonoKote colors used on this model and stock
            numbers for six foot rolls;
            Metallic Blue TOPQ0402           Missile Red   TOPQ0201
            Yellow        TOPQ0203           White         TOPQ0204

                                                                    jxs 8/22/08
                                                                         ir/jxs



– If you need more information, use these Great Planes resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@greatplanes.com
Web Site: http://www.greatplanes.com/
Phone: 217-398-8970


 
Postal Address:
Great Planes
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators