View Larger Picture

Tower Catalog Page:	33
E-mail This Page To A Friend

       This is a Radio Controlled, Glow Powered, Almost-Ready-to-Fly,
             Phoenix Models Extra 330S .60 Sport Scale Airplane.
                For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: Balsa and plywood
          Wing: 2 piece w/wll wood construction, ailerons pre-installed
          Covering: Factory applied Oracover
          Radio Compartment: Plywood reinforced
          Cowling: Pre-painted Fiberglass
          Canopy: Preinstalled w/pilot on fuselage hatch
          Landing Gear: Pre-formed aircraft aluminum, 0.14" (3.5mm) thick
          Wheels: Two 2-1/4" (57mm) foam main, one .75" (19mm) tail wheel
          Aileron Control: Dual servo
          Fuel Tank w/pre-assembled stopper, approximately 10oz (300cc)
          Building Time: Dependent upon builders experience
          Warranty Period: 90 Day Limited Warranty

INCLUDES: Wingset w/pre-installed ailerons
          Horizontal Stabilizer w/pre-installed elevator
          Verticle Stabilizer w/pre-installed rudder
          Pre-assembled hatch w/canopy, pilot, and instrument panel sticker
          2-1/4" (57mm) Blue spinner
          Hardware package
          Motor mount with mounting hardware
          Fuel Tank w/pre-assembled stopper

REQUIRES: Engine: .60 - .91  two-stroke
          Muffler: A standard muffler should work, there is a channel cut out
                   of the bottom of fuselage and the motor mounts inverted at
                   an angle lining up the the muffler with the channel
          Radio: 4 channel radio (FUTJ40**)
          Servos: 6-Standard (2-Aileron, 2-Elevator, 1-Throttle, 1-Rudder)
          Servo Extension: One 12" ext.
          Y-Harness: Two (one for ailerons, one for elevators)
          Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
                       propeller, building and field equipment.

SPECS:    Wingspan:     63.8 " (1620mm)
          Weight:       7.5 - 7.94lb (3.4-3.6  kg)
          Length:       50.39" (1280mm)
          Specs such as Wing Area and Wing Loading are not provided by the
            manufacturer
          Airfoil: Fully Symmetrical,(2 piece Mid Wing placement)
          Center of Gravity: 4-3/4" (120mm) Back from the wing's leading edge
          Control Throws-          High Rate        Low Rate
            Elevator: Up & Down   2-3/4" (70mm)    1-3/8" (35mm)
            Rudder: Right to Left 2-3/4" (70mm)   1-9/16" (40mm)
            Ailerons: Up & Down  1-9/16" (40mm)      5/8" (15mm)

COMMENTS: Pilot shown inside the plane is included
          Measurements given for throws are from center

          If a replacement fuel tank is needed, order the Sullivan 10oz flex
            tank (SULQ1728), or the DuBro 10oz tank (DUBQ0210).
            Some minor trimming and modifications may be required.

                                                                   rda 8//24/06
                                                                         ir/jxs
                                                              updt jxs 11/19/09



– If you need more information, use these Phoenix Models resources –

E-mail: airsupport@greatplanes.com
 
Postal Address:
Phoenix Models
1608 INTERSTATE DRIVE
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators