This is the radio controlled, electric powered, almost ready to fly
Multiplex Easy Star Airplane.
For Beginning Modeler/Flyers.
FEATURES: Construction: Elapor foam, color scheme consists of a white
with grey wings and tail section with yellow and white decal
accents
Wings: Two-piece foam with GRP tubular wing joiner
Radio Compartment: Easily accessible under wing
Motor: Speed 400 size with leads
: Two micro size preinstalled with universal connectors for
and control
Hardware: Control horns, rods and all mounting hardware included
Motor Mount: Wing mounted plastic motor bracket
Electronic speed control, motor w/prop, and w/pushrods are
all preinstalled
INCLUDES: Elapor foam and wing halves, pushrods, 400 size motor
with connector board and cables, one propeller and spinner,
hardware package, tail section, decals, photo-illustrated
instructions
REQUIRES: Battery: 6 cell 900mAh (HCAA3800)
Using this battery will require cutting off the connectors of the
battery and speed control and soldering on Dean's 2-pin Ultra
Plugs (WSDM3001) to the battery and speed control. NOTE, care must
be taken when cutting off battery connector as the leads are very
short. Additional wire may be needed to lengthen leads
********************************************************************
** Please note the batteries listed in the manual are **
** Multiplex #'s (15 5545),(15 6019), and (15 5648). **
** These numbers are not available to us at this time. **
********************************************************************
Charger: Timed or peak
Radio: 3-Channel with micro receiver ( included
with this radio are not needed)
Building and Field Equipment: Medium glue, activator, tools
SPECS: Wingspan: 54" (1370mm)
Wing Area: 371 sq in (24 sq dm)
Weight: 24 oz (680g) with 6 AA cells
: 9.17 oz/sq ft (28 g/sq dm)
Total Length: 36.1" (917mm)
: 3.1" (78mm) from the wing's at the
sides.
Control Throws-
: Up-0.20" (5mm) Down-0.16" (4mm)
(left and right): 0.39" (10mm)
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium glue used with
an activator is the only method of gluing recommended by the
manufacturer.
updt rda 7/27/06
jxs 9/15/05
ir/jxs
updt jxs 9/05/06
– If you need more information, use these Multiplex resources – |
Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948
|
|
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064
|
Click here for Units of Measure Conversion Calculators
|