View Larger Picture

Tower Catalog Page:

59

     This is the radio controlled, electric powered, almost ready to fly
                       Multiplex Easy Glider Sailplane.
                 For beginning to intermediate glider fliers.

FEATURES: Construction: Elapor foam white in color, can be painted (must first
            use Elapor primer #60 2700 or equivalent)
          Wings: Two-piece with fiberglass wing tube, removable wings for easy
            transport
          Canopy: Elapor foam removable for access to motor and radio equipment
          Motor: Permax geared speed 400
          Speed Control: Multiplex X-16 electronic
          Propeller: Folding, black in color
          Spinner: Plastic 1" (26mm) diameter, black in color
          Aileron Control: Dual servo, two micro servos and extensions with
            universal connectors included, ailerons can be deflected up to act
            as spoilers if radio includes this option

INCLUDES: Multiplex Easy Glider Sailplane, speed 400 motor, gearbox, propeller,
            canopy, illustrated instruction manual, decal sheet, ESC, two
            aileron servos, elevator and rudder servo, set-up DVD, all linkages
            and control horns

REQUIRES: Radio: 4-channel transmitter and receiver
          Battery: 7-8 cell NiCd or NiMH (GPMP0250), or 2 cell LiPo
            These batteries require the Female Red 2-Pin Connector
            (GPMM3107) to be attached to the speed control
          Battery Charger: Designed for type of battery used
          Glue: Regular (not foam safe) CA with activator see COMMENTS
            (hot melt glue from a glue gun can also be used)
          Building and field equipment

SPECS:    Wingspan: 71" (1800mm)
          Length: 44" (1115mm)
          Weight: 31oz (880g)
          Wing Area: 644 sq in (41.6 sq dm)
          Wing Loading: 6.8 oz/sq ft (21 g/sq dm)
          Center of Gravity: 2.75" (70mm) from wing root measured at the
            fuselage

          Control Throws-
            Elevator (up and down): 0.51" (13mm)
            Rudder (left and right): 0.79" (20mm)
            Ailerons: up  0.79" (20mm)
                      down 0.31" (8mm)
            Spoilers (both ailerons up): 0.79" (20mm)
            Elevator Mix with Spoiler: 0.20" (5mm)

COMMENTS: This model is not made of styrofoam and is not compatible with white
            glue or epoxy. Use only CA glue with an activator.

                                                                    jxs 7/21/06
                                                                         ir/jxs



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators