Parts Express Eligible:	Yes
Tower Catalog Page:	190
E-mail This Page To A Friend

   This is a 75BBS Retract Servo used for R/C Aircraft Mechanical Retracts
      with a Universal Futaba J, Hitec S, JR and Airtronics Z connector.

FEATURES: High torque
          Travels 180° - full-lock to full-lock - to hold your gear in position
            securely. Not proportional. Perfect for mechanical retract
            installation.
          Water resistant
          Ball bearings

INCLUDES: Servo w/Universal connector, as well as full set of horns, grommets,
            bushings and mounting screws.

SPECS:    Length: 44mm (1.7")       Weight: 35g (1.23 oz.)
          Width:  23mm (0.9")       Torque: 6.6 kg-cm (92 oz-in)
          Height: 25mm (1.0")       Speed:  0.5 sec/60°

COMMENTS: A retract servo is a very specialized servo. It is non-proportional,
            going 180 degrees, "lock to lock". They are specifically made for
            mechanical retracts to lock the gear in the up and down positions.
            they DO NOT have any means of end point adjustment and can not be
            adjusted by ATV on a transmitter. They are only able to go 180
            degrees and provide full maximum available torque at the two end
            points. This is their whole purpose and intentional design, but if
            someone has a unique design situation where they need other than
            180 degrees available, then they must use a proportional servo,
            not a retract servo. They are specifically designed to withstand
            constant holding loads in the up and down positions, unique to the
            use of mechanical retracts.
            Pneumatic retracts do not need a retract servo. A proportional
            standard or mini servo is used to move the air valve back and forth

            For Gear set, order HRCM6343

                                                                          ir/jl
                                                               updt jxs 2/13/06



– If you need more information, use these Hitec resources –

E-mail: service@hitecrcd.com
Web Site: http://www.hitecrcd.com/
Phone: 858-748-6948


 
Postal Address:
Hitec
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators