View Larger Picture

Tower Catalog Page:	202
E-mail This Page To A Friend

    This is the Fuji Imvac BT-43EI-2 Gasoline Powered Airplane engine with
                            Electronic Ignition.
         Ideal for aerobatic planes and 1.60-size engine applications.

         *** 3-YEAR Limited Warranty Details on page 9 of manual***

FEATURES: Electronic Ignition System offers reliable starting in a smaller size
            and weight than typical magneto systems
          Walbro HDA222 carburetor with velocity stack to increase air flow
          Three crankshaft bearings-one front, two center-help to lessen
            vibration
          Special back plate allows engine to bolt directly to firewall,
            lowering overall weight and vibration and eliminating mounting
            plate
          Newly designed compact muffler constructed of steel
          Friction disc pad keeps propeller from slipping on hub
          Spinner bolt is predrilled and tapped for attaching a prop adapter

INCLUDES: Fuji Imvac BT-43EI-2 engine
          Walbro Carburetor
          Muffler FJIG6020 w/gasket  FJIG5900
          Two Muffler Bolts
          EIS Unit FJIG1001
          Prop Hub "A" FJIG7679
          Prop Hub "B" (Prop Washer) FJIG6840
          Grip Washer FJIG8540
          Spinner Bolt FJIG8050
          10mm Spinner Bolt Washer   FJIG8775
          Prop Bolt FJIG8360
          8mm Prop Bolt Washer       FJIG8680
          Four M5x20 Cap Head Bolts
          Champion RCJ6Y Spark Plug  FJIG7470
          Spark Plug Wrench
          4mm Hex Wrench FJIG4920
          One Instruction Manual

REQUIRES: 2-cycle oil, FJIP9910, engine ON/OFF switch

SPECS:  Displacement: 2.6 cu in (43cc)
        RPM Range: 1000-11,000
        Output: 4.2 hp @ 11,000 RPM
        Weight: 4.03 lbs (1,829 g) with muffler
                3.78 lbs (1,719 g) without muffler
        Length: 6.7" (171mm) front of prop hub to rear of engine mount flanges
                3.5"  (88mm) front of prop hub to front of cooling head

        Width: 6.8" (173.35mm) outside of velocity stack to outside of
                 muffler bolts
               4.1"   (104mm) outside of engine mounting flanges
               2.9"    (73mm) center of crankshaft to outside of muffler bolts
               3.9" (100.5mm) center of crankshaft to outside of velocity
                 stack
        Height: 6.2" (157mm) bottom of crankcase to top of installed spark
                   plug wire
                4.9" (124mm) center of crankshaft to top of installed spark
          plug wire

        Mounting Hole Centers: 3.5" (90mm) side to side
                               1.8" (45mm) top to bottom

COMMENTS: Recommended Prop: 20x10 (TOPQ5240)
          Oil Mixture: Page 4 of manual
          Break-in: Page 6 of manual
          Needle Settings: Pages 8 & 9
                H: Open the needle 3/4 of a turn from the closed position
                   (±1/4 of a turn in winter).
                L: Open the needle 1-3/4 turns from the closed position (±1/4
                   (±1/4 of a turn in winter).
          Spark Plug Gap: .4mm to .6mm (.016-.024") re page 3 of manual

                                                                    jxs 8/03/06
                                                                         ir/jxs
                                                               updt lmm 3/26/09



– If you need more information, use these Fuji Imvac resources –

Click Here: Manufacturer's Product Web Page
E-mail: enginesupport@hobbico.com
Web Site: http://www.fuji-imvac.com/
Phone: 217-398-8970


 
Postal Address:
Fuji Imvac
3002 N. APOLLO DRIVE, SUITE 1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators