View Larger Picture

Tower Catalog Page:	58
E-mail This Page To A Friend

                This is the radio controlled, electric powered
                        Dumas DH-82 Park Flyer Kit.

FEATURES: Construction: Hand selected laser cut balsa
          Vacuum molded cowl and spinner
          Rudder and Elevator Control: Wire pushrod
          Servo Placement: Mounted in rails on fuselage
          Landing Gear: 1/16" diameter wire front, tail wire skid
            requires bending

INCLUDES: All balsa, lightweight colored (black and white) tissue covering
            two 1-3/4" (45mm) lightweight foam main wheels, tail wire skid,
            lightweight plastic tail wheel, CA hinges and all hardware to
            complete kit, instruction manual, two full-size plan sheets,
            acetate sheet for windows and vacuum molded cowl and spinner

REQUIRES: GWS IPS (indoor power system) motor with "A" ratio gear drive
            GWSG2023
          3 channel radio system (minimum)
          3 micro servos
          5A ESC w/BEC GWSM2059
          2 cell 700mAh LiPo battery
          GWS 9x7 prop, GWSQ2019
          Building and field equipment

SPECS:    Length: 25" (635mm)
          Wingspan: 35" (889mm)
          Wing Area: 352sq.in. (22.74 sq dm)
          Airfoil: Flat bottom
          Center of Gravity (CG): 3-7/16" 87.5mm) back from the leading edge
            of the TOP wing
          Control Throws-
            Elevator, Up and Down: 1/2" (13mm)
            Rudder, Left and Right: 1" (25.5mm)

                                                                    rmb 9-21-06
                                                                         ir/jxs




– If you need more information, use these Dumas resources –

Web Site: http://www.dumasproducts.com/
Phone: 800-458-2828


 
Postal Address:
Dumas
909 EAST 17TH STREET
TUCSON, AZ 85719  








Click here for Units of Measure Conversion Calculators