View Larger Picture

E-mail This Page To A Friend

                This is the nitro powered, radio controlled 2WD
                 Custom Works Enforcer GSX Dirt Oval Racer Kit.

FEATURES: Chassis: High strength, carbon fiber construction (4mm thick)
          Roll Cage: Injection molded nylon construction, white in color
          Body: Four clear Lexan panels
          Shocks: Four coil-over large volume with threaded, anodized blue
           aluminum bodies (50wt shock oil included)
          Shock Towers: High strength, carbon fiber construction
          Transmission: Racing GT type, single speed with 2.60 ratio
          Fuel Tank: 2.5oz (75cc) with flip top cap
          Clutch: Two shoe
          Clutch Bell: Steel construction with 23 tooth aluminum pinion
          Spur Gear: 60 tooth, black nylon construction (kimbrough brand)
          Differential: Ball diff type
          Tires: Street track design, CSWC6204 front and CSWC6214 rear
          Wheels: Black nylon dish design CSWC6252 front and CSWC6253 rear
          Steering: Rack type with links
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: Custom Works Enforcer GSX Dirt Oval Racer Kit, lexan body panels,
           75cc fuel tank, 23 tooth bell pinion, 60 tooth spur gear, wheels,
           tires,

REQUIRES: Engine: .12 cu in rear exhaust, slide valve (clutch parts for either
           a threaded shaft or pilot shaft type engine are included)
          Manifold: Header and Tuned Pipe
          Radio: 2-channel with 2 standard size servos
          Radio Batteries: Eight AA cells
          Receiver Battery: 5-cell rechargeable - DTXM2031
          Fuel Bottle: - DTXP0150
          Glow Plug Heater: - DTXP3000
          Building and Track Equipment:

SPECS:    Dimensions and weight not provided by manufacturer
          Transmission Ratio: 2.60:1
          Final Drive Ratio: 6.78:1 (with included pinion and spur combo)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size        Location                        Bearing Set Qty.
             4   3/16x3/8"   Front wheels                       DTXC1423   2
             4   3/16x3/8"   Rear Hubs                          DTXC1423   2
             2   5/32x5/16"  Diff gear and outdrive             DTXC1411   1
             4   3/16x3/8"   Gearbox                            DTXC1437   2
             2   3/8x5/8"    Gearbox                            DTXC1437   1
             1   Not Known   Clutch Bell Inner Bearing          CSWC4438   1
             1   Not Known   Clutch Bell Outer Flanged Bearing  CSWC4439   1

COMMENTS: The use of a remote glow plug kit is suggested (MODP1221). Without
           the use of this kit the wing will have to be removed for access to
           the glow plug.

                                                                  kpm11/02/2006
                                                                         ir/jxs



– If you need more information, use these Custom Works resources –

E-mail: customworkstech@aol.com
Web Site: http://www.customworksrc.com/
Phone: 704-489-8147


 
Postal Address:
Custom Works
760-B CROSSPOINT DRIVE
DENVER, NC 28037  








Click here for Units of Measure Conversion Calculators