Parts Express Eligible:	Yes
E-mail This Page To A Friend

   This is an Adapter Kit Used To Mount Tru Turn Aluminum Spinners Onto The:
            Newer (Post-99) Saito .50 - 1.00 4-Stroke Engines.

            **This kit requires reaming of the front of propeller**
            **to 1/2" (13mm) diameter for proper thread make up of**
   **adapter to the Saito short crankshaft. Ream to a depth of 3/8" (9mm).**

FEATURES: Steel Adapter Nuts Screws Onto The Crankshaft Holding the Propeller
            On, Then A 10-32 Bolt Screws Into The Nut From Front, Holding The
            Spinner In Place.
          This Adapter Can And Should Be Used In Place Of The TT-718-A or
            TT-716-A (Neither Carried) In Any Application Where A Short Shaft
            Double Jam Nut Kit Is Needed.

INCLUDES: One Short Shaft Double Jam Nut Adapter Kit

REQUIRES: 1/2" End Wrench To Tighten
          Tru Turn Aluminum Spinner

SPECS:    Crankshaft Thread Size: 7 x 1.0mm
          Spinner Mounting Bolt Thread Size: 10-32

COMMENTS: Use The Saito Aluminum Washer Under Your Tru Turn Adapter Nut
            and Washer, Then Check Closely For Threads Bottoming Out Or
            Interfering.
          Tru Turn Will Modify Backplate For A Small Fee and Postage Paid.
          The 10-32 Bolt That Is Included With The Spinner Might Require
            Cutting, Depending On The Prop Used.
                                                                    JAL 6/11/99
                                                                          ir/jl
                                                               updt jxs 8/16/06



– If you need more information, use these Tru Turn resources –

E-mail: supertech@truturn.com
Web Site: http://www.tru-turn.com/
Phone: 281-479-9600


 
Postal Address:
Tru Turn
ROMCO MANUFACTURING, INCORPORATED
PO BOX 1896
DEER PARK, TX 77536  








Click here for Units of Measure Conversion Calculators