Parts Express Eligible:	Yes
E-mail This Page To A Friend

This is the Helimax Tailboom Servo Mount Set for Concept 30, Nexus and Concept
VR Helicopters.  Moving the Rudder Servo from the Nose to the Tailboom Reduces
the Length of the Linkage between the Tail Pitch Lever and the Servo, Thereby
Limiting Flex, and the C.G. of the Helicopter is Shifted Back Slightly.
A Servo Extension may be Required on Many Helicopters.

FEATURES: Blue Anodized Aluminum
          Includes Mounting Bolts

INCLUDES: Two Servo Mounts
          Two Mounting Bolts
          Four Servo Mounting Screws
          Four Washers for Servo Mounting Screws

SPECS:    Mounts Length: 47mm
          Mount Ring Outer Diameter: 28mm
          Mount Ring Inner Diameter: 20mm
          Mounts Thickness: 6.5mm

REQUIRES: Servo with Servo Grommets
          Allen Wrenches
          Z-Bend Pliers or other Linkage Set for Shorter Linkage Rod
          Threadlocking Cement

COMMENTS: Will Work On All Helicopters with 20mm Outer Diameter Tailbooms
          Concept 30 Series
          Nexus 30 Standard and Deluxe
          Nexus 46
          Nexus Legato
          Concept 32 VR and 46VR
                                                                    krm 9/29/99
                                                                          ir/jl



– If you need more information, use these Heli-Max resources –

E-mail: helihotline@hobbico.com
Web Site: http://www.helimax-rc.com/
Phone: 217-398-8970


 
Postal Address:
Heli-Max
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators