View Larger Picture

Tower Catalog Page:	59
E-mail This Page To A Friend

            This is the radio controlled, electric powered, Multiplex
                   Mini Mag Park Flyer Trainer Airplane Kit.
                        For Beginning Modeler/Fliers.

FEATURES: Construction: Molded Elapor foam white in color
          Wings: Molded Elapor foam (one-piece)
          Motor: Permax 400, 6V
          Prop: Paul Gunther #203 5x4.5 (125mmx110mm)
          Radio Compartment: Accessible under wing
          Landing Gear: Prebent fixed wire 0.16" (4mm) diameter,
            can be fitted with optional Float Set MPUQ7369 (not included)
            Float Set requires brushless motor for water take-offs
          Wheels: Two foam 2" (54mm) diameter
          Aileron Control: Can be added for enhanced flight characteristics
          Cowl: Elapor foam,
          Hardware: Complete set included featuring .031" diameter pushrods
          Decals: Peel and stick application with yellow, orange and red
            accents and black windows
          Building Time: Ready to fly in several hours

INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
            hardware, pre-bent 0.16" (4mm) wire landing gear, two 2" (54mm)
            wheels, speed 400 motor, electric motor mount, 5x4.5 prop, decal
            sheet and illustrated instructions.

REQUIRES: Radio: 3 channel (4 channels if building with ailerons)
          Servos: 2-4 nano size servos (1 rudder, 1 elevator, 2 for ailerons)
          Y-Harness: 1 required if using ailerons - HCAM2500
          Battery: 7 cell AA size battery or 2-3 cell LiPO - GPMP0712
          Speed Control: GPMM2025 (will require soldering motor leads and 3.5mm
           male bullet connectors to the motor
          Misc. Items: Building and field equipment

SPECS:    Wingspan: 39.75" (1010mm)
          Weight: 20.5oz (581g)
          Length: 32.25" (819mm)
          Airfoil: Flat bottom high-wing placement
          Center of Gravity: 2.6" (67mm) back from the leading edge of the
            wing at the fuselage side
          Control Throws-
            Elevator: up and down 7/16" (11mm)
            Rudder: right and left 3/8" (10mm)
            Ailerons: up 5/16" (7mm),  down  1/8" (3mm)

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

                                                                    jxs 9/12/06
                                                                  kpm11/01/2006
                                                                         ir/jxs



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators