View Larger Picture

Tower Catalog Page:	59
E-mail This Page To A Friend

     This is a Radio Controlled, Electric Powered, Elapor Foam Construction
                 Multiplex Acro Master 3D Airplane Kit.
              For Intermediate to Advanced Modeler/Flyers.

FEATURES: Molded, Elapor Foam fuselage parts, white in color
          Wings: Molded, Elapor foam construction, white in color
          Radio compartment: Elapor foam construction
          Cowling: Elapor foam construction
          Canopy: Elapor foam construction
          Landing gear: Pre-bent .10" (2.6mm) diameter wire
          Aileron Control: Dual Servo
          Wheel pants: Elapor foam construction, white in color
          Spinner cone: Elapor foam construction, white in color
          Hardware: .070" (1.75mm) diameter pushrods, plastic hinges, and other
           miscellaneous hardware
          Designed by Aerobatic Champion Martin Mueller
          Motor Mount: White plastic construction
          Wheels: Elapor foam construction with metal axle sleeve

INCLUDES: Elapor foam airplane parts, pre-bent wire landing gear, 2" (51mm)
           diameter wheels, fiberglass wing spar, hardware package, elapor
           wheel pants and spinner cone, decals and illustrated instructions.

REQUIRES: Motor and ESC : Multiplex Power Kit (MPUG3215), Includes Himax
            HC3516-1130 Brushless Motor and Multiplex MULTIcont BL-55 ESC
          Battery - 3 cell LiPo - GPMP0617
          Charger - GPMM3153 (charge lead required - GPMM3148)
          Radio: 4-channel radio with micro receiver
          Servos: 2 16oz/in torque minimum for the ailerons - MPUM6520
                  2 35oz/in torque minimum for rudder and elevator - MPUM6521
          Servo Extension 12": 2 required for aileron servos - HCAM2100
          Y-Harness: 1 required for aileron servos - HCAM2500

SPECS:    Wingspan:    43" (1095mm)
          Wing Area:      557.27 sq in (36.6 sq dm)
          Weight:         32-36oz (907-1020g)
          Wing Loading:   8.19 oz/sq ft (25 g/sq dm)
          Length:         45.25" (1150mm)
          Airfoil:        Fully-Symmetrical, mid-wing placement
          Center of Gravity: 4-3/4" (120mm) Back from the wing's leading edge
            at the fuselage sides.
          Control Throws-           Low Rate       High Rate
            Ailerons: Up & Down  1-3/8" (35mm)   2-3/16" (60mm)
            Elevator: Up & Down  1-3/8" (35mm)   2-3/4"  (70mm)
            Rudder: Right & Left 1-3/4" (45mm)   3-1/8" (80mm)

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with an
            activator is the only method of gluing recommended by the
            manufacturer.

                                                                  kpm11/01/2006
                                                                         ir/jxs
                                                               Upd OA 3/13/2008



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators