View Larger Picture

On-line Videos:	Video 1 (4.5 MB)
Product Warning:	Important Warning! Please Read!
E-mail This Page To A Friend

        This is the 72MHz Futaba 12ZAP Computer Radio on Mode 2 with the
                  R5114DPS Synthesized 14-Channel Receiver.
                         Does not include servos.

    This is the airplane version which will default to airplane settings
             when powered up and has a ratcheted throttle stick.

    If your transmitter's region code is something other than the United
 States,the TM-14 Module sold in the United States is not compatible with this
   transmitter.  As such, it is necessary to purchase the TM-14 module which
                matches the region code of the transmitter.

         The Futaba 12ZAP shares many features with the 14MZ such as
          Dual Internal Processors, Real-Time Response with 2048PCM,
   Fully Synthesized Receiver that operates in either Mode A (standard Mode)
                             or Mode B (new Mode),
                 Servo Grouping, Variable Dual Rates and
                           Quad-Bearing Gimbals
**** While you can obtain a 50MHz module for this radio, it can only be ****
******* purchased through the service center at 217-398-8970 opt 2 *******

FEATURES: Dial-N-Key jog dial with joy stick button allows cursor movement in
            four directions for very user friendly programming
          PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and
            FM/PPM
          10 free (user programmable) mixes
          24 preset model types, 8 heli swash types and 16 model types for
            fixed wing aircraft
          Supports eight flight conditions (seven plus the default)
          Stores memory for up to twenty-five models
          245 model memory available with optional 32MB Compact Flash Card
            available separately
          Six factory-set Variable Dual Rate (VDR) curves can be assigned to
            any function in any flight condition configuration
          Variable Dual Rates (VDR) and Expo can be combined so they are
            automatically activated when a function is activated, no program
            mixing required
          Dual Internal Processors allow one processor to be devoted to flying
            functions while the other processor focuses on non-flight
            functions such as input and communications
          7.4V 2200mAh Lithium Ion transmitter battery (FUTM1475) for long
            operating times
          R5114DPS Receiver;
            Operates in either Mode A (standard Mode) or if flying a model
            that generates a lot of RF interference or if flying in an area
            where interference may occur Mode B (new Mode) may be selected
            By using state-of-the-art Ball Grid Array (BGA) layered PC board
            technology, the 12ZAPs R5114DPS 14-channel synthesized receiver is
            the world's smallest. All pilots will appreciate how easy its
            WFSS (Wireless Frequency Setting System) makes changing frequencies
            at busy airfields. It can be done right from the transmitter
            without changing crystals.
          Servo Grouping;
          Multiple servos controlling a single function can be set up
            through the transmitter and then plugged into differently
            adjustable receiver channels (even non-consecutively) without
            needing a separate servo synchronizer for mixing.
          Quad-Bearing Gimbals for smoothest motion and response, stick tension
            and detent are adjustable
          Seven color LED indicator

INCLUDES: 12ZAP Synthesized Transmitter (not available separately)
          72MHz MZ-FM Module (only available through Futaba Service Center)
          R5114DPS 72MHz Receiver (FUTL7708)
          FLT2F2200 7.4V 2200mAh Lithium Ion Transmitter Battery (FUTM1475)
          LBC-1D5 Lithium Ion Transmitter Battery Charger (FUTM1700)
          NR4F NiCd 1500mAh Receiver Battery (FUTM1285)
          FBC-32B Wall Charger for Receiver Battery (FUTM1705)
          DSC Cable (FUTM4243)
          Switch Harness with Charge Cord (FUTM4387)
          Padded Aluminum Case with two Keys (not available separately)
          Woven Orange Neck Strap (FUTM5693)
          One each 1.5mm and 2.5mm Hex Wrenches
          Instruction Manual

REQUIRES: CF Memory Card for downloading software updates
          Charging batteries before use
          Servos of modeler's choice, suggested servos for use with the 12Z
            include the Futaba S9154 Digital High Speed Servo (FUTM0214) and
            the Futaba S9255 Hi-Torque Heli Digital Servo (FUTM0225)

SPECS:    Transmitter;
            Operating System: 2-stick, 12 channels, PCM-G3 synthesizer system
            Modulation: PCM-G3, PCM 1024, or FM/PPM switchable
            Power Supply: 7.4V FLT2F2200 Li-Ion Battery
            Current Drain: 500mA average

          R5114DPS Receiver;
            Receiving Frequency: US only 72 or 50MHz bands
            Intermediate Frequency: 10.7MHz & 450kHz
            Power Requirement: 4.8V NiCd battery
            Current Drain: 75mA
            Size: 2" x 1.5" x .65" (52mm x 37.5mm x 16.5mm)
            Weight: 1.16oz (33g)

                                                                    jxs 3/19/07
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators