View Larger Picture

Tower Catalog Page:	61
E-mail This Page To A Friend

                This is the radio controlled, electric powered
                        Dumas DH-4 Park Flyer Kit.

FEATURES: Construction: Hand selected laser cut balsa
          Vacuum molded cowl
          Rudder and Elevator Control: Wire pushrod
          Servo Placement: Mounted in rails on fuselage
          Landing Gear: 1/16" diameter wire front, tail wire skid
            requires bending

INCLUDES: All balsa, lightweight colored (blue and yellow) tissue covering,
            two 2" (51mm) diameter plastic main wheels, tail wire skid,
            CA hinges and all hardware to comlete the kit, instruction manual,
            two full-size plan sheets, and vacuum molded cowling.

REQUIRES: GWS IPS (indoor power system) motor with "A" ratio gear drive
            GWSG2023
          3 channel radio system (minimum)
          3 micro servos
          5A ESC w/BEC GWSM2059
          2 cell 700mAh LiPo battery
          GWS 8x6 prop, GWSQ2017
          Building and field equipment

SPECS:    Length: 25" (635mm)
          Wingspan: 35" (889mm)
          Wing Area: 329sq.in. (22.74 sq dm)
          Airfoil: Flat bottom
          Center of Gravity (CG): 1-13/16" (46mm) back from the leading edge
            of the TOP wing
          Control Throws-
            Elevator, Up and Down: 5/8" (11mm)
            Rudder, Left and Right: 3/4" (20mm)

                                                                  kpm02/15/2007
                                                                         ir/jxs



– If you need more information, use these Dumas resources –

Web Site: http://www.dumasproducts.com/
Phone: 800-458-2828


 
Postal Address:
Dumas
909 EAST 17TH STREET
TUCSON, AZ 85719  








Click here for Units of Measure Conversion Calculators