View Larger Picture

Tower Catalog Page:	61
E-mail This Page To A Friend

                This is the radio controlled, electric powered
                     Dumas Aeronca C-3 Park Flyer Kit.

FEATURES: Construction: Hand selected laser cut balsa
          Vacuum molded nose cowl
          Rudder Control: Pull-pull cables
          Elevator Control: Wire pushrod
          Servo Placement: Mounted in rails on fuselage
          Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
            requires bending

INCLUDES: All balsa, lightweight colored (black and yellow) tissue covering
            two 1-3/4" (45mm) lightweight foam main wheels, CA hinges and all
            hardware to complete this kit, instruction manual, two full-size
            plan sheets, and acetate sheet for windows

REQUIRES: GWS IPS (indoor power system) motor with "A" ratio gear drive
            GWSG2023
          3 channel radio system (minimum)
          2 micro servos
          5A ESC w/BEC GWSM2059
          2 cell 700mAh LiPo battery
          GWS 8x6 prop, GWSQ2017
          Building and field equipment

SPECS:    Length: 22" (559mm)
          Wingspan: 40" (1016mm)
          Wing Area: 329 sq.in. (21.25 sq dm)
          Airfoil: Flat bottom, high wing placement
          Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the
            wing at the fuselage side
          Control Throws-
            Elevator, Up and Down: 3/4" (19mm)
            Rudder, Left and Right: 1" (25mm)

                                                                  kpm02/15/2007
                                                                         ir/jxs



– If you need more information, use these Dumas resources –

Web Site: http://www.dumasproducts.com/
Phone: 800-458-2828


 
Postal Address:
Dumas
909 EAST 17TH STREET
TUCSON, AZ 85719  








Click here for Units of Measure Conversion Calculators