View Larger Picture

On-line Videos:	Video 1
Instruction Manuals:	Manual 1 (16 MB)
Tower Catalog Page:	102
E-mail This Page To A Friend

   This is the 1/10 scale electric powered  radio controlled  Ready-To-Run
           HPI E-Savage Off-Road Monster Truck with GT truck Body.

FEATURES: Chassis: Savage style rigid 6061-series aluminum TVP (twin vertical
            plate) with low battery bays for lower center of gravity and better
            traction
          Drive: Four wheel with sliding driveshafts and safety protected
            reverse
          Motors: Two 550 size motors with internal cooling fans to maximize
            power
          Radio:HPI TF-3 digital proportional AM 2 channel 27MHz
          Electronic Speed Control: HPI GT 14.4V ESC with failsafe
          Transmission:Single speed
          Ball Bearings: Full set included
          Shocks: Eight oil-filled  long travel with coil-over spring
          Batteries: Two HPI GT 7.2V 3300mAh NiMH
          Battery Charger: GT Escape peak with DC 12V adapter
          Main Gear:66 tooth nylon gear with 20T pinion
          Gearbox: Sealed  plastic
          Differentials: Geared
          Tires: 5.4 x 2.8  (138 x 70mm) (HPIC8302)
          Wheels: AR-5 chrome finish 3.5x2.2  (HPIC8301)
          Body: Baja TT highly detailed monster truck
          Bumpers: Nylon
          Suspension: Non adjustable  double wishbone
          Steering Tie Rods: Steel threaded M4x60mm  adjustable
          Steering Servo : SF-2 nylon gear servo with servo saver
          Warranty: Two year limited, valid only in US, Canada and South
            America

INCLUDES: HPI E-Savage Off-Road Monster Truck with GT Body, eight shocks
            two 14.4V motors, two 7.2V 3300mAh batteries, charger with 12V DC
            adapter, GT speed controller, illustrated instruction manual
            and decals

REQUIRES: Eight AA batteries for the transmitter

SPECS:      Vehicle-
          Length: 17.91" (455mm)
          Width:  14.29" (363mm)
          Weight:  9.5lbs (4300g) approx.
          Wheelbase: 11.54" (293mm) wheels on-center front-to-rear
          Ground Clearance: 3.25" (82.55mm)
          Gear Ratio: 3.6:1 pinion and spur
          Tires-Front and Rear: 5.4 x 2.8" (138 x 70mm)
            Body-
          Length: 15.25" (387mm)
          Width:  7-1/4" (184mm) at rear wheels (widest point)
          Height: 5" (127mm)

COMMENTS: For Replacement Ball Bearings use:
             Qty.  Size      Location                 Qty. Bearing Set
              2   10x15mm    Fr Hubs                   1   DTXC1595
              2    6x12mm    Fr Hubs                   1   DTXC1569
              2   10x15mm    Rear Hubs                 1   DTXC1595
              2    6x12mm    Rear Hubs                 1   DTXC1569
              2    5x11mm    Gearbox                   1   DTXC1547
              6    6x12mm    Center Gearbox            3   DTXC1569
              2   10x15mm    Diff Case                 1   DTXC1595

         The battery holders included are designed for use with 6-cell (7.2V)
           battery packs and would not accommodate 7-cell batteries.

                                                                    jxs 8/17/06
                                                                    wm 10/13/06
                                                                         ir/jxs



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators