This Norfolk & Western USRA Heavy Mountain 4-8-2 Steam Locomotive (#118) is a
DCC Sound-Equipped Spectrum® Model by Bachmann®.
Suitable for Ages 8 & Older.
FEATURES: Equipped with DCC On Board® technology, which allows you to
digitally control the direction, speed, and lighting of this
locomotive using Bachmann's E-Z Command® Digital Command Control
System (BACU4402), or any NMRA-compliant DCC system.
The decoder itself features the following:
* 2 and 4 digit addresses
* advanced consisting
* dimmable lighting
* settable acceleration, decleration,
starting speed, and much more!
100% backwards-compatible with standard DC (non-digital) layouts.
Equipped with a 28-speed step decoder.
Main track programming.
Also equipped with a state-of-the-art Digital Sound Decoder that's
based on SoundTraxx® Tsunami® Digital Sound Technology. The
decoder has been designed with a powerful Digital Signal
Processor (DSP) and:
* Supports extended address mode for assigning any
locomotive number up to 9,999
* Supports advanced consist addressing
* Supports "Operation Mode Programming," allowing CVs to
be changed on the mainline without using a programming
track
The automatic dual mode decoder is set to operate immediately
using either a 12 volt DC power pack or NMRA-compatible
DCC command station.
Many advanced features including:
* Programmable acceleration, deceleration and starting
voltage for prototypical starting and stopping
* Use of standard and alternate speed tables
The 16-bit sound processor provides:
* Adjustable volume control of each sound effect individually
* 1-watt audio amplifier
* Auto-Exhaust allows chuff to be synchronized to the locomotive
speed without the complexity of a synchronizing cam
All of the steam sound effects have been re-mastered and re-digitized
for the best audio possible:
- Steam Exhaust Chuff - Airpump
- Bell - Dynamo
- Whistle - Water Stop
- Short Whistle - Brake Squeal
- Brake Release - Snifter Valve
- Side Rod Clank - Cylinder Cocks
- Firebox Blower - Johnson Bar/Power Reverser
- Coupler Clank - Cylinder Blowdown (Hiss)
The Dynamic Digital Exhaust modifies exhaust volume, cutoff and
timbre as locomotive load changes.
Powerful motor.
Operating headlight.
All-metal chassis and side rods.
Blackened metal RP25 wheels.
Wire railings and coupler cut bars.
E-Z Mate® Mark II couplers with metal coil springs.
Exquisitely detailed tender with realistic coal load.
Painted engineer figures within the detailed cab.
Accurately molded plastic body shell prototypically painted black
with crisp yellow print: 118, Norfolk & Western.
Quick Start Guide and CD-ROM instructions for Bachmann® DCC
Sound-Equipped locomotives.
Dummy plugs also included with installation instructions.
INCLUDES: (1) Locomotive & Tender
REQUIRES: Minimum 22" Radius Curve
SPECS: Scale: HO 1:87
Overall Size -
Length: 14-1/8" (359mm)
Width: 1-3/8" (34mm)
Height: 2-1/8" (55mm)
kr2/1/07
– If you need more information, use these Bachmann resources – |
Web Site: http://www.bachmanntrains.com/
Phone: 215-533-1600
|
|
Postal Address:
Bachmann
1400 EAST ERIE AVENUE
PHILADELPHIA, PA 19124
|
Click here for Units of Measure Conversion Calculators
|