This is the Tekin R1 Pro Electronic Speed Control For Brushless Motors.
FEATURES: On-board temperature indicator
PC interface for custom programming *Tekin HotWire required
One touch programming and radio calibration
Pit tune mode
Digital glitch filtering
Solder posts for easy wire replacement
Self test diagnostics and factory reset
Program Features;
Drag Brake (13 steps)
Brake/Reverse Strength (13 steps
Current Limiter (none, 12 steps)
Neutral Width (7 steps)
Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
Voltage Cutoffs (none, 2S, 3S, Custom)
Extensive Tuning via Tekin HotWire PC Interface (sold separately)
INCLUDES: Tekin R1 Pro speed control, male bullet connectors, power cap,
zip ties, double sided tape and instructions
REQUIRES: Brushed or brushless motor
SPECS: Controls: Forward/Brake/Reverse
ON Resistance: 0.00005 Ohms (brushed fwd mode)
0.00015 Ohms (brushless mode)
0.00015 Ohms (brushed fwd/rev mode)
Input Voltage: 4 - 9 Cells, 2 - 3S
BEC 6.0 V / 3.0 A
Motor Limit: Brushed and Brushless, no limit
Profiles: 1-7
Max Current: Brushed Forward, 312amps / 624amps
Brushless per Phase: 104amps / 208amps
Dimensions: 1.3 x 1.00 x 0.65" (33 x 25.4 x 16.5mm)
Weight: 2.3 oz (65g) with wires
jxs 6/19/07
ir/jxs
Click here for Units of Measure Conversion Calculators
|