View Larger Picture

Tower Catalog Page:	115
E-mail This Page To A Friend

      This is the 1/12 scale glow powered, radio controlled, off-road
         almost ready to run Ofna Jammin' CRT.5 Pro Mini Truggy.
    Now includes the extended chassis allowing full size servos to be used
       for both steering and throttle and improves the model's handling.

FEATURES: Chassis: CNC machined hard coated 7075 aluminum .12" (3mmm) thick
          Drive: Four wheel shaft drive
          Fuel Tank: 2.53oz (75cc)
          Transmission: Single speed
          Exhaust: Polished tuned pipe and round port manifold
          Ball Bearings: Full set, rubber sealed
          Shocks: Four oil filled 13mm big bore with 3.5mm shaft
          Shock towers: 4mm thick CNC machined aluminum shock towers
          Main Gear: 46 tooth, steel construction
          Clutch Bell: 13 tooth, steel construction with twin 5x10mm bearings
          Gearboxes: Sealed front and rear
          Universals: Hardened steel alloy
          Differentials: Oil filled bevel gear type
          Brakes: Front and rear disc with center brake cams for superior
            braking and brake bias adjustability
          Clutch: Three shoe
          Engine Mounts: Adjustable hard anodized aluminum with cooling fins
          Wheels: Jammin' Neon Yellow 2.2" dish wheels with 12mm hex wheel hub
          Tires: Proline Bowtie 2.2" Buggy square pins with foam inserts
          Suspension: Four wheel independent with adjustable camber and
                          t-bolt kingpin front knuckle design
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of
            the tops of the tires from vertical when viewed from front
            or behind vehicle
          Steering: Bellcrank steering with spring loaded servo saver
          Body: Clear polycarbonate Jammin' Truggy body
          Wing: Plastic construction, adjustable
          Bonus: Four Proline neon yellow dished 2.2" wheels
          This vehicle is 80% built out of the box. You still need to build the
            shocks, install an engine, radio equipment and paint the body.

INCLUDES: Ofna Jammin' CRT.5 Pro truggy with tires, wheels, aluminum
            shocks, clear body, wing, 46t steel spur gear, 13t clutch bell,
            manifold, pipe, adjustable turnbuckles, tank, steel brake disc,
            Jammin wheels, Proline wheels, decals, graphite radio tray and
            illustrated manual

REQUIRES: Radio: 2-Channel with 2 Servos
          Radio Batteries: (12) AA size
          Engine: .12 w/rear exhaust and pilot (SG) shaft
          Glow Starter: 1.2 volt - DTXP3000
          Paint: Polycarbonate for body
          Misc. Items: Fuel bottle, building and track equipment

SPECS:    Length: 14" (356mm)
          Width:  11" (279mm)
          Weight: 4lbs (1814 grams)
          Wheelbase: 8.8" (225mm)

COMMENTS:  You can remove the wheel hub and use 2.2" buggy (pin mount)
             rear wheels (for the front and rear). This is how the bonus
             Proline wheels mount to the truck.

                                                                     jxs 3/5/07
                                                                    ajw 3/15/07
                                                                         ir/jxs
                                                                  kpm03/11/2008



– If you need more information, use these Ofna resources –

E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910


 
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators