E-mail This Page To A Friend

        This is the 1/10 scale Stadium Raider Stadium Truck from Tamiya.
        It Has Four-Wheel Shaft Drive On-Road Electric on a TL01 Chassis.

FEATURES: Three Step Forward and One Step Reverse Mechanical Speed Control,
          Shaft Driven Four Wheel Drive with Front and Rear Gear Differentials
          Sealed Gearboxes
          Front and Rear Double Wishbone Suspension
          Coil Spring Damped Suspension System (not oil-filled shocks)
          Polycarbonate Monocoque Type Frame
          540 Type Electric Motor
          Spire Spike Tires
          One Piece, Gray Plastic Wheels
          Plastic Bushings
          TL01 Chassis with Mid-Motor Mount in Front of the Rear Wheels
          Highly Detailed Polycarbonate Body With Decals

INCLUDES: Mechanical Speed Control
          Motor
          Rubber Treaded Tires
          TL01 Chassis
          Decals
          Clear Lexan Body

SPECS:    Motor Type: 540 size with bullet type connectors
          Body: Stadium Raider Truck Body
          Speed Control: 3-step forward, 1-step reverse, mechanical
          Shocks: coil spring damped (not oil filled)
          Tires: OD: 85mm (3.35")
                 Width: 30.6mm (1.2")
          Wheels: pattern: 5-spoke
                  adapter type: standard hexagonal (same as Kyosho)
                  wheel color: White
                  Diameter: 54mm (2.13), Width: 29.2mm (1.15")
          Length:   423mm (16.67")  Weight:  1640 grams
          Width:    204mm (8.04")
          Height:   177mm (6.98")
          Wheel Base: @ 260mm (10.24")
          BEARINGS (optional): Twenty-four 5x11mm total
                                  Four- Prop Shaft (see comments)
                                  Twelve- Gearbox
                                  Eight- Wheels/Axle

REQUIRES: 2-Channel Radio with 2-Standard Servos
          Six Cell Battery with Tamyia Connector
          Charger
          Paint
          Phillips Head Screw Drivers
          Needle Nose Pliers
          Wire Cutters
          Hobby Knife
          Lexan Scissors
          CA Glue

COMMENTS: The kit is colored Yellow on the box. The decals are lights,
            bumper, sponser names, "Stadium Raider" logo, and a checkerd strip
            down the side
          This does not use a steering bellcrank assembly
          The steering tie rods, front & rear camber rods are not adjustable
          The motor mount is designed to only be able to use pinion gears
            that are 19, 21 or 23 teeth and 48 pitch Metric.
          This car utilizes a shaft drive system for the four wheel drive.  The
            "propeller shaft" is the shaft that runs lengthwise along the car
            to drive the front gearbox.
                                                                    BBS 12/4/99
                                                                          ir/jl



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators