Instruction Manuals:	Manual 1 (184 KB)
E-mail This Page To A Friend

       This is the Futaba MC850C Programmable Electronic Speed Control.

FEATURES: Developed for radio control electric cars
          For Brushed motors 5 turns and above
          Operates with 4-7 cell (4.8 - 8.4V) NiCd or NiMH batteries
          ATL brake travel adjustment
          Simple digital setting system
          Low voltage, power on and heat protection
          Aluminum upper case
          External solder points with 12AWG silicone flex wire
          Terminal is Oxygen-Free-Copper

INCLUDES: Futaba MC850C with Schottky diode, capacitors, double sided tape,
            three silicone flex wires, two heat shrink tubes, miniature
            screwdriver and instruction sheet

REQUIRES: Installing in vehicle and connecting to motor, battery and receiver

SPECS:    Momentary Current: 3360A
          Constant Current: 840A
          Current: 120A
          Current Limit: Yes, with timer
          Neutral Brake: Yes
          Driving Frequency: .1kHz - 10kHz programmable
          Input Voltage: 4.8 - 8.4V
          Dimensions: 1.1 x 1 x .57" (28.7 x 26.2 x 14.5mm)
          Weight: .62oz (17.5g)
          Wire Size: 12AWG
          Motor Limit: 5 turns and above

                                                                   jxs 03/05/07
                                                                    tlw 5/14/07
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators