View Larger Picture

E-mail This Page To A Friend

          This is the HPI Nitro Star G3.0 Engine with Pull Starter
                    used in the HPI Fire Storm - HPIC0510.

FEATURES: Composite body rotary valve carburetor with 5.5mm bore
          Silver colored cooling head
          SG (pilot) type crankshaft
          Two year limited warranty

INCLUDES: HPI Nitro Star G3.0 Engine with Pull Start, instruction manual,
            R5 cold glow plug (HPIG1504), foam air cleaner assembly with four
            zip ties, brass collet

REQUIRES: Fuel: Car blend with 20-25% nitro content
          Misc Items: Fuel tubing and track equipment

SPECS:    Specs such as horsepower, bore, stroke and RPM were not provided-
            contact HPI for further infomation
          High Speed Needle Setting: Turn clockwise in 1/8 turn increments
            to lean fuel mixture. Do not exceed 2-1/2 turns from flush
          Idle Adjustment: Adjust for about 0.04" (1mm) gap between slide valve
            and carb body at bore opening
          Low Speed Needle: No adjustment recommended
          Displacement: .18 cu in (3.0cc)

          Distance Between Mounting Holes Same Side: 0.43" (11mm)
          Distance Between Mounting Holes Opposite Side: 1.22" (31mm)
          Height/Bottom Mounting Flanges to Top of Cylinder Head: 2.99" (76mm)
          Height/Bottom of Crankcase to Top of Cylinder Head: 3.5" (89mm)
          Length from Pull Starter to End of Crankshaft: 4.13" (105mm)
          Length from Pull Starter to Front Bearing: 3.3" (75.3mm)
          Length from Center of Crankcase to End of Crankshaft: 2.96" (75mm)
          Diameter of Carburetor Bore: 0.21" (5.5mm)

                                                                  kpm02/20/2007
                                                                         ir/jxs



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators