View Larger Picture

Parts Express Eligible:	Yes
E-mail This Page To A Friend

            This is an 18.1x10W Composite Pattern Propeller from APC.

FEATURES: APC props are manufactured using a pultrusion process. This method
            causes the fiberglass "fibers" to be oriented axially in 1/2" long
            pellets, allowing for a higher fiber (60%) to resin (nylon binder)
            density. Providing substantially higher strength and stiffness than
            glass filled nylon.
          The additional stiffness is beneficial to control of vibration
            resonance response
          The higher strength allows the use of thinner cross-sections,
            beneficial to weight and aerodynamic efficiency
          Competition proven
          Single piece propeller

INCLUDES: 18.1x10W Composite Pattern Propeller

REQUIRES: ALL props require balancing (use TOPQ5700)
          May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:    Prop Diameter: 18.1"
          Prop Pitch:    10
          Hub Thickness: 0.83" (21mm)
          Weight: 4.9oz (140g)
          Hole Diameter: 5/16" (8mm)

                                                                   jxs 03/13/07
                                                                         ir/jxs
                                                              updt jxs 10/09/08
                                                              updt jml 12/18/08



– If you need more information, use these APC resources –

Web Site: http://www.apcprop.com/
Phone: 530-661-0399


 
Postal Address:
APC
PO BOX 938
1222 HARTER AVE
WOODLAND, CA 95776  








Click here for Units of Measure Conversion Calculators