This is Master Airscrew's injection-molded Fiberglass-Filled 16x10 3-Blade
Nylon Propellor. This is suitable for any application from training and
sport flying to serious competition.
FEATURES: Factory-balanced 3-blade prop has NACA airfoils and holds true pitch.
They have been accurately balanced and create a greater thrust
at lower RPM.
Prop is glass-filled nylon as opposed to a wooden prop.
INCLUDES: One 16x10 Glass-Filled Nylon 3-Bladed Propeller.
SPECS: Diameter: 16"
Pitch: 10"
COMMENTS: The general rule for converting a 2 blade prop to a 3 blade is
subtract 1" from Diameter OR subtract 1 from the Pitch.
baw 01/03/02
ir/kh
PER MASTER AIRSCREW: All 3- and 4- blades props are balanced dynamically at the
factory prior to drilling. The mounting holes are then drilled slightly off
center, if required, to properly balance the propeller. As such, your mounting
hole may be slightly off center. Master Airscrew assures us this is perfectly
normal and will not cause any problems during usage.
– If you need more information, use these Master Airscrew resources – |
Web Site: http://www.masterairscrew.com/
Phone: 916-631-8385
|
|
Postal Address:
Master Airscrew
MASTER AIRSCREW/WINDSOR PROPELLER
PO BOX 250
RANCHO CORDOVA, CA 95741
|
Click here for Units of Measure Conversion Calculators
| 
Yes
E-mail This Page To A Friend
