View Larger Picture

Parts Express Eligible:	Yes
E-mail This Page To A Friend

                This is a MRC EMD Modern Switcher Sound Decoder

FEATURES: A highly advanced DCC locomotive sound decoder with authentic
            diesel sound, and 19 accessory functions allowing more sound
            control than ever!
          Pre-soldered 28mm round speaker and NMRA 8 pin plug.
          Synchronized diesel prime mover with randomly associated locomotive
            sounds.
          Manually select between 11 different horns and 7 bells.
          1.5 amp capacity.
          Programmable for either 2-digit or 4 digit addresses.
          Programmable individual sound volumes.
          Programmable acceleration rate and deceleration rate.
          Programmable start voltage and top voltage.
          Programmable 14, 28, 128 speed steps.
          Directional lighting (FO) at 0.2 amp rate.
          Selectable factory default speed curve.
          Programmable "Rule 17" directional lighting.
          Programmable for either ditch lights, mars light, or strobe light.
          Supports advanced consisting (CV19, CV21).
          Supports programming on the main (OPS mode).
          Compatible with NMRA DCC standards.
          Complies with the part 15 of FCC.
          Detailed installation instructions.

INCLUDES: (1) Sound Decoder

SPECS:    Gauge: HO  1:87
                                                                      kr4/25/07



– If you need more information, use these MRC resources –

E-mail: mrcsupport@modelrectifier.com
Web Site: http://www.modelrec.com/
Phone: 732-225-6144


 
Postal Address:
MRC
PO BOX 6312
EDISON, NJ 08818  








Click here for Units of Measure Conversion Calculators