This is the Novak SS13.5 Pro Brushless Electric Motor and
GTB Speed Control for Brushless Motors Racing System
Specifically designed for cars and trucks, ROAR legal.
FEATURES: SS13.5 Brushless Motor (NOVC3413);
Provides lap performance similar to a 27-turn racing stock brushed
motor but with the brushless advantage of minimal maintenance,
long life and increased run times
Sensor-based technology for excellent low-speed drivability, starting
torque and low speed accelerationprovide high power and great
High-strength rotor
Direct-solder wiring tabs for flexible soldering options
Oversized front bearing (3/8 x 1/2") for extra durability anding
and extended life (also used in Velociti-series motors)
Novak GTB Programmable Electronic Speed Control (NOVM1710);
Four different color status LEDs for easy set-up, programming and
profile selection
3 fully-programmable fwd/brake/ Brushless profiles
1 fully-programmable fwd/brake/ Brush motor profile
1 fully-programmable fwd/brake/rev Brushless motor profile
1 fixed-programming Limited Reverse (25%) profile
Programming adjustments include; Min Drive, Min Brake, Drag Brake &
Dead Band, Drive Frequency adjustable in the Brush-Mode
Low profile high volume cooling fan and factory team Power Trans-Cap
Module
Gold plated PCB direct-solder tabs and 6-layer circuit boards for
lowest possible voltage drop and easy power wire replacement
User replaceable input harness, long and short input harnesses
supplied
Remote power programming switch combines one-touch button and ON/OFF
switch, can be remotely mounted for easy programming adjustments
and powering ESC ON and OFF
Water-resistant case with complete gasketing for improved protection
120 day limited warranty on both components
INCLUDES: Novak GTB Programmable Electronic Speed Control with Factory
Installed Power Wires and Power Trans Cap Module, User-Replaceable
Remote Power Programming Switch and Input Harness (two lengths
included), Instructions, double Sided Tape
SS13.5 Brushless Motor
REQUIRES: Installing in vehicle
SPECS: SS13.5 Brushless Motor
Input Voltage: 4-6 cells (1.2V/cell)
Watts: 165
KV (unloaded) 3,300 RPM/volt
Magnet: One-piece, multi-pole cylindrical high-strength neodymium
Size: 2.08" L x 1.41" D (52.8 x 35.8mm)
Shaft Diameter: 0.125" (3.2mm) (acepts all existing pinion gears)
Weight: 6.4 oz. (181 grams)
Front Bearing Size: 1/2 x 3/16" (12.7 x 4.8mm)
GTB Programmable Electronic Speed Control
Size: L 1.49" (37.8mm), W 1.16" (29.5mm)
Weight: 1.36oz (38.5g) without wires
BEC: 6.0V/3.0A
Input Voltage: 4-6 cells (1.2VDC/cell)
*On Resistance (Brushless): 0.00040 ohms
*On Resistance (Brush Mode): 0.00013 ohms
*Rated Current (Brushless): 540A/phase
*Rated Current (Brush Mode): 1620A
Battery/Motor Wire:14AWG silicone
Profiles: 6 (5 Brushless/1 Brush)
Drive Frequencies: 1 of 7 (1.5-11kHz)
Minimum Drive: 1 of 5 (2-12%)
Minimum Brake: 1 of 10 (5-50%)
Dead Band: 1 of 5 (2-6%)
Braking Style: Std or Drag Brake
Drag Brake: 1 of 10 (10-50%)
Brushless Motor Limit: Any Novak
Brushed Motor Limit: None
*Transistor rating @ 25°C junction temp
COMMENTS: For replacement Trans-Cap Module, order NOVM5679.
For a replacement Fan order NOVC5648, or NOVC5652 for a two-pack
For replacement Remote Power Switch, order NOVM5602
jxs 5/08/07
ir/jxs
– If you need more information, use these Novak resources – |
E-mail: cs@teamnovak.com
Phone: 949-833-8873
|
|
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614
|
Click here for Units of Measure Conversion Calculators
| 
E-mail This Page To A Friend
