This is the Novak SS13.5 Pro Brushless Electric Motor and
GTB 4-Cell Speed Control for Brushless Motors Racing System
Specifically designed for cars and trucks, ROAR legal.
FEATURES: SS13.5 Brushless Motor (NOVC3413);
Provides lap performance similar to a 27-turn racing stock brushed
motor but with the brushless advantage of minimal maintenance,
long life and increased run times
Sensor-based technology for excellent low-speed drivability, starting
torque and low speed accelerationprovide high power and great
High-strength rotor
Direct-solder wiring tabs for flexible soldering options
Oversized front bearing (3/8 x 1/2") for extra durability and
and extended life (also used in Velociti-series motors)
Novak GTB 4-Cell Programmable Electronic Speed Control (NOVM1714);
Compatible with all Novak 540-size sensored brushless motors and has
no brushed motor limit
Differs from the #1710 Novak GTB ESC in the following ways;
30% smaller height profile
No heat sink or cooling fan
Smaller 16 gauge wire for 25% lighter weight
Replaceable, resolderable input and switch harnesses
Four different color status LEDs for easy set-up, programming and
profile selection
Programming adjustments include; Min Brake, Drag Brake, Deadband and
Minimum Drive
Gold plated PCB direct-solder tabs
Thermal overload protection
switch, can be remotely mounted for easy programming adjustments
One-touch set-up
Water-resistant case with complete gasketing for improved protection
120 day limited warranty on both components
INCLUDES: Novak GTB 4-Cell Electronic Speed Control with Factory
Installed Power Wires and Power Trans Cap Module, User-Replaceable
Remote Power Programming Switch and Input Harness, Instructions
two Sections Shrink Wrap, Instructions, Double-Sided Tape and six
Zip Ties
SS13.5 Brushless Motor
REQUIRES: Installing in vehicle
SPECS: SS13.5 Brushless Motor
Turns: 13.5
Input Voltage: 4-6 cells (1.2V/cell)
Watts: 165
KV (unloaded) 3,300 RPM/Volt
Magnet: One-piece, multi-pole cylindrical high-strength neodymium
Size: 2.08" L x 1.41" D (52.8 x 35.8mm)
Shaft Diameter: 0.125" (3.2mm) (acepts all existing pinion gears)
Weight: 6.4 oz. (181 grams)
Novak GTB 4-Cell Programmable Electronic Speed Control
Length: 1.49" (37.8mm) (37.8mm), W 1.16" (29.5mm)
Width: 1.16" (29.5mm)without wires
Height: 0.61" (15.5mm)
Weight: 1.01oz (28.5g) without wires)
BEC: 6.0V/3.0A(Brushless): 0.00040 ohms
Input Voltage: 4 / cells (1.2VDC/cell)
*On Resistance (Brushless): 0.00040 ohms
*On Resistance (Brush Mode): 0.00013 ohms
*Rated Current (Brushless): 540A/phase
*Rated Current (Brush Mode): 1620A Brush)
Power Wires: 16AWG silicone: 1 of 7 (1.5-11kHz)
Profiles: 6 (1-5 Brushless/6 Brushed)
Battery Plug: None
Motor Plug: None
Braking Style: Std or Drag Brake
Drag Brake: 1 of 10 (10-50%)
Brushless Motor Limit: Any Novak 540 size
Brushed Motor Limit: None
*Transistor rating @ 25°C junction temp
COMMENTS: For replacement Trans-Cap Module, order NOVM5679.
For replacement Remote Power Switch, order NOVM5602
jxs 5/08/07
ir/jxs
– If you need more information, use these Novak resources – |
E-mail: cs@teamnovak.com
Phone: 949-833-8873
|
|
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614
|
Click here for Units of Measure Conversion Calculators
|