This is the Novak 3-Cell Li-Po Cut-Off Smart Stop Module.
FEATURES: Monitors voltage of 3-cell lithium polymer battery packs to prevent
them from going below the critical safety voltage level
One touch set-up button learns the ESC's settings for accurate and
complete control
Works with any brand brushed or brushless speed control for car, boat
or air applications
If voltage safety level approaches, operation with short
periods of blipping will occur along with flashing of the
LED warning that it is time to bring vehicle in-if vehicle is run
beyond this period, the module will bring to the motor to neutral
while leaving steering control
INCLUDES: Novak Smart Stop 3-Cell Cut-Off Module with universal connector
two plastic ties, two sections double-sided tape and instruction
sheet
REQUIRES: Connecting between receiver and speed control
SPECS: Voltage Range: 3 cell
Low Voltage Indicators: Interruption (30 total) and Flashing
Blue LED
Size: 0.69 x 1.18 x 0.25 inches (17.5 x 30.0 x 6.4 mm)
Weight: 0.4 oz. (11 grams)
Voltage Cut-Off Point: 6.25 volts
Voltage Monitor Accuracy: 1%
Set-Up: One-Touch
Input Harness: 9" (228mm) with standard plug
LED Harness: 6" (152mm) replaceable harness with ultra bright blue
LED attached
Battery Connection: 10" (254mm), 20 gauge Black & Red silicone wire
ESC Connection: Standard 3-pin
COMMENTS: Also available for 2-cell Li-Po applications, NOVP5470
and 4-cell Li-Po applications, NOVP5471
jxs 04/12/07
– If you need more information, use these Novak resources – |
E-mail: cs@teamnovak.com
Phone: 949-833-8873
|
|
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614
|
Click here for Units of Measure Conversion Calculators