View Larger Picture

E-mail This Page To A Friend

           This is the 1/10 scale electric powered, radio controlled,
            Tamiya Drift Spec Nismo Coppermix Silvia On_road Car Kit.

FEATURES: Chassis: Plastic tub TT-01 design
          Drive: Four wheel shaft drive
          Motor: Sport tuned 540 size with pre-attached leads and aluminum heat
            sink
          Electronic Speed Control: Tamiya TEU-101BK, TAMM3194
          Lights: LED head and tail lights turn ON automatically when car is
            switched ON, the Tamiya #53937 Light Control Unit (TAMC1477) can be
            added for more control
          Ball Bearings: Full set
          Shocks: CVA mini drift spec with short springs
          Gearbox: Sealed front and rear
          Differentials: Bevel gear
          Transmission: Single speed
          Tires: Drift type  1.25"x2.52"
          Wheels: Black 5-Spoke Wheels
          Body: Clear
          Bumpers: Foam front bumper
          Suspension: Double wishbone, fixed non-adjustable
          Camber Tie Rods: Fixed non-adjustable
           (Camber is the angle at which the tires sit vertically)
          Steering Tie Rods: Fixed non-adjustable
            (Caster/Toe-in is the angle at which tires point inward as
              viewed from above)
          Steering: Bell-crank type
          Servo Saver: Included

INCLUDES: Nismo Coppermix Silvia Drift Car kit, drift spec shocks, 540 motor,
            Electronic Speed Control, clear body, tires, foam bumper,
            wheels, 19 tooth pinion gear, 61 tooth spur gear, instructions

REQUIRES: Radio: 2-channel with one steering servo
          Battery: 6 flat pack with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery

SPECS:      VEHICLE-
          Length: 17.4"  (444mm)
          Width:   7.4"  (187mm)
          Height:  5.2"  (132mm)
          Weight: 3.1lbs (1400g)
            BODY-
          Length: 17.4"  (441mm)
          Width:   7.5"  (190mm)
          Height:  4.3"  (110mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                       Bearing Set Qty.
            12   5x11mm   front & rear diff gears, hubs  (use 6 DTXC1547)
             4   8X12mm   front & rear diff gears        (use 2 DTXC1597)

          Body pictured on the box is painted white with all sponsor decals
            applied

                                                                     JiM 4.3.07
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators