This is the radio controlled, glow powered, Almost-Ready-to-Fly
Phoenix Models Tucano 40 Low Wing Sport Trainer Airplane.
For beginning to intermediate modeler/fliers.
FEATURES: Construction: Balsa and plywood construction with most parts laser
cut
Wing: One-piece with aluminum wing joiner tube
Cowl: Painted fiberglass
Canopy: Clear, double with two painted pilot busts
Radio Compartment: Plywood reinforced, accessible under wing
Landing Gear: Pre-bent wire 0.16" (4mm) diameter
Wheels: Three 2.25" (57mm) diameter foam
Fuel Tank: Approximately 12oz (360cc), section of foam included for
cushioning
Engine Mount: Non-adjustable composite construction, pre-mounted
Spinner: Red plastic 2.25" (57mm) diameter
_ Covering: Factory applied Oracover
Control: Dual servo
INCLUDES: Pre-built wing, and tail assemblies, wheels, cowl, engine
mount, fuel tank, hardware package, two pilot busts, foam rubber,
decal sheet, landing gear, aluminum wing tube and photo-illustrated
instructions
REQUIRES: Radio: 4 ch
Servos: 5 standard size (2-, 1-throttle, 1-, 1-)
: One, for
Extensions: Two 6" (152mm) for
Engine: .40 - .46 cu in (6.5 - 7.5 cc) 2-stroke
Muffler: Standard muffler supplied with engine-cowl must be cut
(CG): 3.9" (100mm) back from the of
the wing at the
Control Throws-
: Up & Down 0.39" (10mm)
: Right to Left 0.79" (20mm)
: Up & Down 0.31" (8mm)
Building and field equipment
SPECS: Wingspan: 61.5" (1560mm)
Length: 50.5" (1285mm)
Wing Area: 581 sq in (37.5 sq dm)
RTF Weight: 6.5lb (2950g)
: 26oz sq/ft (79g sq/dm)
Airfoil: Semi symmetrical, low wing placement
COMMENTS: If a replacement fuel tank is needed, order the Sullivan 12oz flex
tank (SULQ1741), or the DuBro 12oz tank (DUBQ0212).
Some minor trimming and modifications may be required.
jxs 5/01/07
ir/jxs
updt jxs 11/19/09
– If you need more information, use these Phoenix Models resources – |
E-mail: airsupport@greatplanes.com
| |
Postal Address:
Phoenix Models
1608 INTERSTATE DRIVE
CHAMPAIGN, IL 61822
|
|
Click here for Units of Measure Conversion Calculators
|