This is the 1/12 scale glow powered, radio controlled, off-road
almost ready to run Ofna Jammin' CRT.5 Picco Mini Truggy.
This version includes the Ofna Picco .12R ROAR legal engine.
Now includes the extended chassis allowing full size to be used
for both steering and and improves the model's handling.
FEATURES: Chassis: CNC machined hard coated 7075 aluminum .12" (3mmm) thick
Drive: Four wheel shaft drive
Fuel Tank: 2.53oz (75cc)
Transmission: Single speed
Engine: Ofna Picco .12R .12 cu in (2.0cc) with slide valve carb,
three ports, ROAR legal, foam air filter, and SG (pilot)
crankshaft
Exhaust: Polished tuned pipe and round port manifold
Ball Bearings: Full set, rubber sealed
Shocks: Four oil filled, aluminum bodied 13mm big bore with 3.5mm
shaft
Shock Towers: 4mm thick CNC machined aluminum shock towers
Main Gear: 46 tooth, steel construction
Clutch Bell: 13 tooth, steel construction with twin 5x10mm bearings
Gearboxes: Sealed front and rear
Universals: Hardened steel alloy
Differentials: Oil filled bevel gear type
Brakes: Front and rear disc with center brake cams for superior
braking and brake bias adjustability
Clutch: Three shoe
Engine Mounts: Adjustable hard anodized aluminum with cooling fins
Wheels: Four Proline neon yellow 2.2" dish
Four Ofna Jammin' yellow wheels with 12mm hex
Tires: Proline Bowtie 2.2" Buggy square pins with foam inserts
Suspension: Four wheel independent with adjustable camber and
T-bolt kingpin front knuckle design, no E-clips used
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable front and rear, camber refers to the angle of
the tops of the tires from vertical when viewed from front
or behind vehicle
Steering: Bellcrank steering with spring loaded servo saver
Body: Clear polycarbonate Jammin' Truggy body
Wing: Plastic construction, adjustable
80% pre-built out of the box. You still need to build the shocks,
install engine, radio equipment and paint the body.
INCLUDES: Ofna Jammin' CRT.5 Picco truggy with tires, wheels, aluminum
shocks, clear body, wing, 46T steel spur gear, 13T clutch bell,
manifold, pipe, adjustable turnbuckles, tank, steel brake disc,
Proline wheels, decals, carbon fiber radio tray and instructions
Jammin' yellow wheels with 12mm hex and Picco .12 engine
REQUIRES: Radio: 2-Channel with 2
Radio Batteries: (12) AA size
Engine Starter: Off road starter box
Glow Starter: 1.2 volt - DTXP3000
Paint: Polycarbonate safe spray or brush-on for body
Misc. Items: Fuel, fuel bottle, building and track equipment
SPECS: Vehicle-
Length: 14" (356mm)
Width: 11" (279mm)
Weight: 4lbs (1814 grams)
Wheelbase: 8.8" (225mm)
Body-
Length: 12.75" (324mm)
Width: 4.6" (117mm) behind front wheels-narrowest point
5.0" (128mm) at rear wheels-widest point
Height: 3.8" (98mm)
COMMENTS: You can remove the wheel hub and use 2.2" buggy (pin mount)
rear wheels (for the front and rear). This is how the bonus
Proline wheels mount to the truck.
jxs 3/28/07
ir/jxs
– If you need more information, use these Ofna resources – |
E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910
|
|
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618
|
Click here for Units of Measure Conversion Calculators
|