This is the Futaba 2.4GHz TM-14 Module and R6014FS 14-Channel Receiver
for the 14Z, 12Z and 12FG Radio Systems.
The software of the 50MHz and 72MHz 12FG, 12Z and 14MZ systems
must be updated prior to installing this module.
A Memory Card is required, see REQUIRES below for Memory Card type.
The software is available free of charge on the
Futaba Flyers Club website www.14mz.com/forum/
and also on www.2.4gigahertz.com.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) transmits
a large amount of information to the receiver at extremely fast
speed
Simple plug-in module installation-no transmitter modifications
needed
Ultra fast channel shifting eliminates interference and eliminates
the hassle of waiting for frequencies to open up
Dual Antenna Diversity- Futaba 2.4GHz FASST system seamlessly selects
the best reception between two receiver antennas, so there's no
loss of signal
One year limited warranty
INCLUDES: Futaba 2.4GHz TM-14 Module (FUTL8934)
R6014FS 14-Channel Receiver (FUTL7644)
Instruction manual
REQUIRES: Memory Card: The Compact Flash Memory Card is included
with the 14MZ and can also be used with the 12Z. Also, a CF
memory card can be purchased from an electronics store
The 12FG system requires an SD memory card which is not carried and
must be purchased separately
SPECS: 2.4GHz TM-14 Module;
Communication Method: One-way operation system
Transmission Antenna: Mono-pole
R6014FS Receiver;
Reception Antenna: Dual
Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
Weight .25oz (7g)
ajw 04/05/07
updated jpg 9/4/08
Click here for Units of Measure Conversion Calculators
