View Larger Picture

Tower Catalog Page:	112
E-mail This Page To A Friend

           This is the glow powered, radio controlled Ready-To-Run
               Traxxas Nitro Stampede 1/10 scale Monster Truck.

 Please Note: some advertising materials released recently indicate that this
                 vehicle includes additional accessories.
                           This is a misprint.
  Please refer to the "REQUIRES:" section of this product description for the
 additional accessories which are required and need to be purchased separately.

FEATURES: Chassis: 6061 T-6 aluminum anodized blue
          Radio: Traxxas TQ 27MHz AM with high torque steering servo,
            trim and servo reverse, transmitter does not have charge jack
          Engine: Traxxas Pro .15 (2.5cc) with two-needle rotary carb, glow
            plug and EZ-Start electric starter
          Exhaust: Composite construction rear tuned pipe with two outlets
          Drive: Rear wheel
          Body: Pre-painted, pre-cut polycarbonate body with decals applied
          Ball Bearings: Full set included, rubber sealed
          Shocks: Four Ultra shocks oil-filled w/ powder coated White springs
          Slipper Clutch: Adjustable
          Suspension: 4-wheel independent
          Transmission: Magnum 375 with 32 pitch gears and ball bearings
          Differential: Planetary gear with steel internal gears
          Spur Gear: 66-tooth composite construction
          Clutch Bell: 18 tooth steel
          Fuel Tank: 2.5oz (75cc) with flip-top lid and primer bulb
          Brake: Composite disc type
          Tires: Revo spec Talon 2.8" (71mm) inner diameter 4.75" (121mm) outer
            diameter with foam inserts
          Wheels: Chrome finish 5-spoke Traxxas All Star 2.8" (71mm) diameter,
            2.0" (51mm) wide
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: Assembled Nitro Stampede with Pro .15 (2.5cc) engine and glow plug,
            EZ-Start electric starter, painted body with decals, TQ pistol grip
            radio two servos, instruction sheet, 66-tooth spur gear, 18-tooth
            clutch bell

REQUIRES: "AA" Batteries: 12 (8 for transmitter and 4 for receiver)
          6-cell battery: Flat with Tamiya type connector for EZ-Starter
          Charger: Timed or peak for 6-cell battery
          Fuel: Car fuel with 10-15% nitromethane content
          Misc. Items: Fuel bottle and building and track equipment

SPECS:    Length: 17" (432mm)
          Front and Rear Track: 12.75" (324mm)
          Weight: 5.2lb (2.35kg)
          Height: 9.5" (241mm)
          Wheelbase: 10.75" (273mm)
          Ground Clearance: 4" (102mm)
          Gear Ratio: 3.75:1 (internal)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size       Location                    Qty. Bearing Set
             4   5x11mm     Front Wheels                  2    DTXC1547
             4   5x11mm     Rear Wheels                   2    DTXC1547
             6   5x11mm     Transmission                  3    DTXC1547
             2   5x11mm     Clutch Bell                   1    DTXC1547

          REPLACING EZ STARTER WITH STANDARD RECOIL STARTER
            To convert the EZ starting to a standard pull starter, purchase
            part numbers TRAG5170, TRAP5211 one-way bearing, four 3x8mm machine
            screws, take out the three bolts on the EZ-Starter clip the wires
            on the EZ-Starter, and install recoil pullstarter.

          Available with the following radio channels and body colors;
            TRAC85A2  Red with Gray Carbon Fiber Print
            TRAC85A4  Gray With Red Carbon Fiber Print
            TRAC85A5  Gray with Blue Carbon Fiber Print
            TRAC85A6  Ble with Gray Carbon Fiber Print

                                                                    jxs 4/13/07
                                                                         ir/jxs



– If you need more information, use these Traxxas resources –

E-mail: support@traxxas.com
Web Site: http://www.traxxas.com/
Phone: 888-872-9927


 
Postal Address:
Traxxas
1100 KLEIN RD
PLANO, TX 75074  








Click here for Units of Measure Conversion Calculators