View Larger Picture

Tower Catalog Page:	106
E-mail This Page To A Friend

   This is the 1/10 scale electric powered, radio controlled, re-release
               of the 1985 Tamiya Hotshot Off-Road Buggy Kit.

FEATURES: Chassis: Monocoque ABS Resin
          Drive: Four wheel shaft drive with dogbone type linkage
          Motor: Type 540 with aluminum heat sink and connectors
          Electronic Speed Control: Tamiya TEU-101BK w/reverse (TAMM3194)
          Shocks: Front and rear mono type horizontally mounted
          Gearboxes: Sealed
          Differentials: Planetary gear
          Transmission: Single-speed
          Tires: Spike, Front 3" (77mm) diameter, 1.1" (28.5mm) wide
                        Rear  3" (77mm) diameter, 1.4" (37mm) wide
          Wheels: Nylon resin, White in color
            Front  1" (25.4mm) wide, 2" (51mm) diameter
            Rear 1.3"   (33mm) wide, 2" (51mm) diameter
          Bumpers: Front plastic
          Suspension: Four wheel double wishbone
          Camber Tie Rods: Non-adjustable
          Steering Tie Rods: Adjustable
          Steering: Bell crank type with servo saver

INCLUDES: Tamiya Hotshot buggy with two shocks, 540 motor, heat sink
            Electronic Speed Control, body, tires, wheels, 13 and 15 tooth
            tooth pinion gears, spur gear, instructions and decal sheet
                                                                              _
REQUIRES: Radio: 2-Channel with 2 Servos
          Radio Batteries: (8) AA size
          Battery: 6-cell w/standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Paint: Polycarbonate safe spray or brush-on
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:     15.3" (390mm)
          Width:       9.2" (235mm)
          Height:      5.9" (150mm)
          Weight: 2.8lbs (1270g) approximately
          Gear Ratio:  10.43:1 with 13T pinion gear
                       8.704:1 with 15T pinion gear
            BODY-
          Length: 8.7" (220mm)
          Width:  3.7" (95mm) at rear wheels (widest point)
                  3.1" (80mm) at front wheels (thinnest point)
          Height: 2.3" (59mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             1   5x11mm   Rear Gear Assembly           1    DTXC1547
             1   5x8mm    Rear Gear Assembly           1    DTXC1523

          Body pictured on the box is painted Red with decals applied

                                                                    jxs 5/23/06
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators