View Larger Picture

Tower Catalog Page:	59
E-mail This Page To A Friend

       This is the radio controlled, electric powered Multiplex Cularis
                    almost ready to fly 2.6 meter Glider.
    Can be built as a Pure Glider or Electric Powered Glider (see COMMENTS)
                        For intermediate glider flyers.

FEATURES: Construction: Elapor foam to resist damage, white in color
          Wings: Full house design with ailerons and flaps for butterfly/crow,
            dual carbon wing spars, mechanical wing retainer system
            automatically plugs in and secures all wing mounted servos
          Horizontal Stabilizer: Removable for transport
          Aileron Control: Dual servo

INCLUDES: One Multiplex Cularis with decals, hardware, illustrated
            instruction manual

REQUIRES: Radio System: 4-channel with micro receiver
          Battery: 2100mAh 3S1P LiPo recommended
          Battery Charger: LiPo compatible
          Servos: Two tiny servos for elevator/rudder
                  Four nano servos for ailerons
          Servo Extensions: Three 24" (600mm) for aileron servos
          Y Harness: For aileron servos
          Building and Field Equipment: Medium viscosity CA glue and activator,
            see COMMENTS

SPECS:    Wingspan: 102.75" (2610mm)
          Length: 49.6" (1260mm)
          Flying Weight: approx. 49.38oz (1400g) glider only
                         approx. 59.26oz (1680g) with standard power system
          Wing Loading: approx. 8-10 oz/sq ft (25.5/30.5 g/sq dm)
          Wing Area: approx. 853 sq in (55 sq dm)
          CG (Center of Gravity): 74mm
            Control Throws-
          Elevator, Up and Down: +14mm/-14mm
          Rudder, Left and Right: approx 30mm
          Ailerons, Up: +20mm
                    Down: -10mm

COMMENTS: Motor and propeller not included, to convert to electric flight,
            order MPUL9318. This set contains a brushless motor, ESC, propeller
            and all hardware required for electric flight.

          This model is NOT made of styrofoam and it is not possible to glue
            Elapor foam using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

          For an RXR version of the Cularis that includes preinstalled servos,
            order MPUA2618.

                                                                    jxs 8/17/09
                                                                         ir/jxs



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators