View Larger Picture

Tower Catalog Page:	105
E-mail This Page To A Friend

   This is the electric powered, radio controlled, Ready To Run, 1/12 scale
                Tamiya TamTech-Gear Buggy Champ Off-Road Buggy.

FEATURES: Chassis: GB-02
          Drive: Two wheel rear drive with Universal drive shafts
          Motor: 370 size
          Battery: 6-cell flat 7.2V 1100mAh NiMH, 2/3A size cells with White
            2-pin female connector
          Battery Charger: 120V AC wall type with Red 2 pin male connector
          Radio: Tamiya Expec SP TTU-03 27MHz AM pistol grip transmitter with
            steering and throttle trim and reverse and TSU-02 steering
            servo, transmitter does not have charge jack
          ESC: Tamiya TamTech-Gear ESC with forward and reverse (TAMC1383)
          Shocks: Four plastic bodied, friction (not oil filled)
          Suspension: Double wishbone front and rear
          Wheels: Five-spoke
          Tires: 2.36" (60mm) wide, .86" (22mm) diameter
          Spur Gear: 64 tooth
          Pinion: 16 tooth
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-adjustable
          Body: Constructed of polycarbonate with decals applied
          Transmission: Ball differential with full ball bearings and
            adjustable slipper clutch

INCLUDES: Tamiya TamTech-Gear Buggy Champ, 370 motor, 64 tooth spur gear,
            16 tooth pinion gear, instruction manual, Tamiya Expec SP
            2 channel AM radio, Electronic Speed Control, receiver, servo
            battery and charger

REQUIRES: Radio Batteries: 8 AA for transmitter
          Charging battery for 5 hours before use

SPECS:    Overall Length: (278mm)
          Overall Width: 7.24" (184mm)
          Overall Height: 3.5"  (89mm)
          Wheelbase:     6.96" (177mm)
            BODY-
          Length:          10"   (254mm)
          Width:         3.75" (95.25mm)

COMMENTS:  For Replacement Ball Bearings use:
             Qty.  Size      Location                Qty. Bearing Set
             4    8x12mm   Front Wheels              2   DTXC1581
             4    5x8mm    Rear Wheels               2   DTXC1523
             2    3x6mm    Gearbox                   1   DTXC1503
             2    4x8mm    Gearbox                   1   DTXC1511
             2    8x12mm   Gearbox                   1   DTXC1581

                                                                   jxs 05/30/07
                                                                    tlw 7/25/07
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators