View Larger Picture

Tower Catalog Page:	106
E-mail This Page To A Friend

         This is the 1/10 scale, radio controlled, electric powered
                  Tamiya Avante Mk II Off-Road Buggy Kit.

FEATURES: Chassis: DF-03, plastic monocoque .08" (2mm) thick
          Drive: Four wheel shaft drive
          Motor: 540 type
          Gearboxes: Sealed
          Differentials: Ball type
          Shocks: CVA, plastic bodied, oil filled
          Ball Bearings: Full set included
          Suspension: Four wheel independent with specially designed long
            suspension arms for enhanced stability and handling
          Wheels: Dish type, orange in color
          Tires: High density spike Front; 1.2" (30mm) wide, 2.2" (56mm) inner
            diameter, Rear; 1.6" (42mm) wide, 2.2" (56mm) inner diameter with
            foam inserts
          Body: Clear lightweight polycarbonate with rear wing
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Bell-crank type with servo saver

INCLUDES: Tamiya Avante Mk II Off-Road Buggy Kit, 540 motor, decals, body, wing
            tires, wheels foam inserts, 26 tooth pinion gear, ball bearings,
            78 tooth spur gear, shock oil and instruction manual

REQUIRES: Radio: 2-channel with one standard servo
          Radio Batteries: Eight AA for transmitter
          ESC: For 540 stock motor supplied with kit
          Battery: 6-cell flat with standard Tamiya type connectot
          Battery Charger: Timed or Peak for 6-cell battery
          Paint: Polycarbonate safe spray or brush on

SPECS:      VEHICLE-
          Length: 15.3" (390mm)
          Width:   9.8" (250mm)
          Height:  4.8" (121mm)
          Weight: 2.5lbs (1140g)
          Wheels: Front; 1" (25.4mm) wide, 2.2" (57mm) diameter
                  Rear; 1.4" (36mm), 2.2" (57mm) diameter
            BODY-
          Length:  10.5" (267mm)
          Width:    5.3" (135mm)
          Height:  2.25"  (57mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                     Qty.  Bearing Set
             2   10x15mm   Front Diff Gear                1    DTXC1595
             2    5x8mm    Front Diff Gear                1    DTXC1523
             2   10x15mm   Rear Diff Gear                 1    DTXC1595
             2    5x8mm    Rear Diff Gear                 1    DTXC1523
             3    9x5mm    Rear Gear Assembly             2    DTXC1531
             2    5x10mm   Rear Gear Assembly             1    DTXC1535
             1    3x8mm    Rear Gear Assembly             not carried
             2    5x11mm   Rear Axles                     1    DTXC1547
             2    5x11mm   Front Axles                    1    DTXC1547
             2    5x10mm   Front Gear Assembly            1    DTXC1535
             1    3x6mm    Front Gear Assembly            1    DTXC1503
             4    5x8mm    Steering Assembly              2    DTXC1523

          Tamiya recommends the following paint colors to match photo on box
            PC-5 Black
            PS-16 Poly Spray Metallic Blue, TAMR8616

                                                                    jxs 5/29/07
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators