This is the radio controlled, electric powered,
Multiplex Twister Ducted Fan Jet airplane.
For Intermediate Pilots.
FEATURES: Construction: Elapor foam, gray in color
Wings: Two-piece
Ducted Fan Power Set: Multiplex DF69 Impeller Unit with removable
intake ring and Himax HA2825-3600 brushless motor
Radio Compartment: Accessible under canopy
Canopy: Elapor foam
Control: Dual servo
Cowl: Elapor foam
Decals: Peel and stick application with
Building Time: Ready to fly in several hours
INCLUDES: Pre-molded wings, and tail assemblies, pushrods, all
hardware, impeller unit and brushless motor, two peel and stick
decal sheets, illustrated instruction manual
REQUIRES: Radio: 3-channel with micro receiver
: Three micro (2-, 1-)
Battery: 3-cell , at least 2500mAh
Electronic Speed Control: At least 45 amp that is compatible with
a 3-cell battery
12" (300mm) Servo Extensions: Three for and speed control
24" (600mm) One for servo
Misc. Items: Building and field equipment
SPECS: Wingspan: 33.5" (850mm)
Approximate Weight: 31oz (880g) with 2500mAh battery
Overall Length: 46" (1170mm)
Wing Area: (25.5 sq dm)
(FAI) Minimum: (31g sq dm)
Airfoil: Semi-symmetrical
CG (): 3.9 - 4.3" (100-110mm) behind the leading
edge of the wing measured at the
Control Throws-
Up and Down: 0.79" (20mm) +/- Exponential: 30%
Up and Down: 1.2" (30mm) +/-
COMMENTS: This model is NOT made of styrofoam and it is not possible to
glue the material using white or epoxy glue. Medium glue used
with an activator is the only method of gluing recommended by the
manufacturer.
– If you need more information, use these Multiplex resources – |
Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948
|
|
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064
|
Click here for Units of Measure Conversion Calculators
|